CATEGORIES

    Mini Low-Temperature Drying Chamber

    Overview Products Knowledge Standards Terms
    The small low-temperature drying oven generates hot air circulation through electric heating and temperature control systems within a range of 40-150℃, causing moisture in samples to evaporate. It is used in laboratories for drying and curing heat-sensitive materials, commonly applied in scenarios such as coating curing and plastic aging tests.
    Selection
    When selecting, pay attention to the temperature range and fluctuation, corrosion resistance of the inner chamber material, load capacity of the sample tray, and uniformity of hot air circulation. Match the temperature control precision according to the characteristics of the samples, choose the volume based on space utilization, and consider explosion-proof requirements and energy consumption standards.
    Style
    Product Type
    Principle
    Airflow Direction
    Temp Range
    temperature resolution
    volume
    Heater Type
    Chamber Material
    Temp Fluctuation
    Temp Uniformity
    Safety Protection

    Terms

    Non-volatile content
    Rapid Temperature Change High and Low Temperature Test Chamber
    Rotary Evaporator
    Low temperature constant temperature bath
    Closed Cup Flash Point Tester
    Shrinkage Tester
    Dry Particle Size Analyzer
    High and Low Temperature Tensile Testing Machine
    Low Temperature Muffle Furnace
    Six-channel furnace temperature tracker

    Standards

    Incoming GB/T 46513-2025
    Electrochemical performance test of lithium ion battery cathode materials—Test method for low temperature performance
    Active GB/T 20154-2024
    Low Temperature Storage Box
    Active GB/T 228.3-2019
    Metallic materials—Tensile testing—Part 3: Method of test at low temperature
    Active GB/T 38534-2020
    Test method for tensile properties of oriented fibre reinforced polymer matrix composite materials at ultra-low temperature
    Active GB/T 38924.2-2020
    Environmental test methods for civil small and light unmanned aircraft system—Part 2: Low-temperature test
    Active GB/T 12085.23-2022
    Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat
    Active GB/T 12085.22-2022
    Optics and photonics—Environmental test methods—Part 22：Combined cold,dry heat or temperature change with bump or random vibration
    Active GB/T 12085.2-2022
    Optics and photonics— Environmental test methods—Part 2: Cold, heat and humidity
    Active GB/T 2007.6-1987
    General rules for thesampling and sample preparation of minerals in bulk--Determination of moisture content--Heat drying method
    Active GB/T 6284-2006
    General Method for Determination of Moisture in Chemical Products – Loss on Drying Method
    Active GB/T 2423.102-2008
    Environmental testing for electric and electronic products - Part 2: Test methods - Test: combined temperature(cold and heat)/low air pressure/vibration（sinusoidal）
    Active GB/T 2423.59-2008
    Environmental testing - Part 2: Test methods - Test Z/ABMFh: Combined temperature(cold and heat)/low air pressure/vibration（random）
    Active GB/T 32065.2-2015
    Test Methods of Oceanographic Instruments—Environmental Test Part 2: Low Temperature Test
    Active GB/T 13217.5-2023
    Testing method for drying of printing ink
    Active GB/T 24131.1-2018
    Rubber, raw—Determination of volatile matter content—Part 1:Hot-mill method and oven method

    Instruments

    BOZHEN 766-3A Far infrared fast Drying Oven Automatic thermostatic Drying Oven
    BOZHEN 766-3A Far infrared fast Drying Oven Automatic thermostatic Drying Oven

    Far infrared radiation heating technology, temperature control accuracy +/- 2 ℃, equipped with thermistor control thermoMeter, rapid low consumption drying, Inner Chamber dimensions 320 * 380 * 320mm.

    $ 391.00
    Lugong ST-25LA programmable constant temperature and humidity testing machine, high and low temperature heat and humidity alternating environment simulation
    Lugong ST-25LA programmable constant temperature and humidity testing machine, high and low temperature heat and humidity alternating environment simulation

    Using Nidec compressor and DuPont environmental protection refrigerant, Humidity control accuracy of 0.1 ℃, equipped with double-decked vacuum heating defrosting observation window and stainless steel sample holder, support multi-stage programming and Data storage.

    $ 3301.00
    BOZHEN 766-2AS Linear dispersion temperature control Far infrared Drying Oven Automatic thermostatic fast drying
    BOZHEN 766-2AS Linear dispersion temperature control Far infrared Drying Oven Automatic thermostatic fast drying

    Far infrared radiation heating technology, Temperature range RT +~ 300 ℃, Temperature Fluctuation +/- 2 ℃, equipped with thermistor control thermoMeter, automatic thermostatic control, fast drying and low energy consumption.

    $ 883.00
    KESIONOTS KS-OTS-HD1000LC low/high temperature test Chamber environmental test Chamber temperature control -40~ 150 ℃
    KESIONOTS KS-OTS-HD1000LC low/high temperature test Chamber environmental test Chamber temperature control -40~ 150 ℃

    Temperature range -40~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, support high temperature and low temperature alternating cycle test, suitable for pRoduct design improvement and identification inspection.

    $ 8497.00
    KESIONOTS KS-OTS-HD225LB low/high temperature test Chamber environmental test Chamber temperature control -60~ 150 ℃
    KESIONOTS KS-OTS-HD225LB low/high temperature test Chamber environmental test Chamber temperature control -60~ 150 ℃

    Temperature range -60~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, suitable for high temperature and low temperature Reliability test, support aging test, in line with a number of national standards.

    $ 6254.00
    KESIONOTS KS-OTS-HD408LC low/high temperature test Chamber environmental test Chamber Temperature range -40~ 150 ℃
    KESIONOTS KS-OTS-HD408LC low/high temperature test Chamber environmental test Chamber Temperature range -40~ 150 ℃

    Temperature range -40~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, support high and low temperature cycle change test, suitable for material performance inspection and aging test, equipped with multiple safety protection devices.

    $ 6431.00
    KESIONOTS KS-OTS-HD408LB low/high temperature test Chamber environmental test Chamber Industrial Reliability test
    KESIONOTS KS-OTS-HD408LB low/high temperature test Chamber environmental test Chamber Industrial Reliability test

    Temperature range -60~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, support high temperature and low temperature alternating cycle test, suitable for pRoduct design improvement and aging test, in line with a number of national standards.

    $ 6770.00
    KESIONOTS KS-OTS-HD150LB low/high temperature test Chamber environmental test Chamber -60~ 150 ℃ 150L
    KESIONOTS KS-OTS-HD150LB low/high temperature test Chamber environmental test Chamber -60~ 150 ℃ 150L

    Temperature range -60~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, suitable for high temperature and low temperature Reliability test, support aging test, in line with a number of national standards.

    $ 5947.00
    KESIONOTS KS-OTS-HD150LC low/high temperature test Chamber environmental test Chamber -40~ 150 ℃ 150L
    KESIONOTS KS-OTS-HD150LC low/high temperature test Chamber environmental test Chamber -40~ 150 ℃ 150L

    Temperature range -40~ 150 ℃, studio volume 150L, suitable for high temperature and low temperature Reliability test, in line with a number of national standards, aging test and constant temperature test.

    $ 5431.00
    KESIONOTS KS-OTS-HD150LD low/high temperature test Chamber environmental test Chamber temperature control -20~ 150 ℃
    KESIONOTS KS-OTS-HD150LD low/high temperature test Chamber environmental test Chamber temperature control -20~ 150 ℃

    Temperature range -20~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, support high temperature, low temperature and constant temperature test, suitable for Reliability test, equipped with multiple protection devices and safety system.

    $ 4818.00
    KESIONOTS KS-OTS-HD800LD low/high temperature test Chamber environmental test Chamber Temperature range -20~ 150 ℃
    KESIONOTS KS-OTS-HD800LD low/high temperature test Chamber environmental test Chamber Temperature range -20~ 150 ℃

    Temperature range -20~ 150 ℃, Temperature Uniformity +/- 1.0 ℃, support high temperature and low temperature cycle change test, suitable for aging test and material performance inspection.

    $ 7109.00
    KESIONOTS KS-OTS-HD80LA low/high temperature test Chamber environmental test Chamber -70~ 150 ℃ 80L
    KESIONOTS KS-OTS-HD80LA low/high temperature test Chamber environmental test Chamber -70~ 150 ℃ 80L

    Temperature range -70~ 150 ℃, studio volume 80L, Temperature Uniformity +/- 1.0 ℃, suitable for high temperature and low temperature cycle change test, support aging test and a variety of standard requirements.

    $ 5560.00
    BOZHEN 766-0AS Linear dispersion temperature control Far infrared Drying Oven Stainless steel studio rapid drying
    BOZHEN 766-0AS Linear dispersion temperature control Far infrared Drying Oven Stainless steel studio rapid drying

    Far infrared radiation heating technology, Temperature range RT +~ 300 ℃, Temperature Fluctuation +/- 2 ℃, equipped with thermistor control thermoMeter, rapid low consumption drying, suitable for a variety of Sample Handling.

    $ 1009.00
    KESIONOTS KS-OTS-HD1000LB low/high temperature test Chamber environmental test Chamber -60~ 150 ℃ 1000L
    KESIONOTS KS-OTS-HD1000LB low/high temperature test Chamber environmental test Chamber -60~ 150 ℃ 1000L

    Temperature range -60~ 150 ℃, studio volume 1000L, stainless steel studio and high temperature insulation material, support high and low temperature cycle change test, in line with a number of national standards.

    $ 9352.00
    KESIONOTS KS-OTS-HD80LB low/high temperature test Chamber environmental test Chamber -60~ 150 ℃ 80L
    KESIONOTS KS-OTS-HD80LB low/high temperature test Chamber environmental test Chamber -60~ 150 ℃ 80L

    Temperature control range -60~ 150 ° C, studio volume 80L, suitable for high temperature and low temperature cycle change testing, in line with a number of national standards, equipped with perfect protection devices and imported refrigeration system.

    $ 5043.00

    Articles

    The use of gravure proofing machines in the comprehensive evaluation of gravure ink printability and drying performance.
    This article explores how a gravure proofing press can be used to comprehensively evaluate the printability and drying properties of gravure inks. The experiment tested the dot sharpness, transfer rate, and leveling properties of different inks using standard equipment, while recording drying times through the filter paper method and infrared temperature measurement.
    The friction color fastness tester measures the amount of color transfer under dry and wet abrasion conditions for ink.
    This article introduces a method for testing the amount of ink color transfer using a friction colorfastness tester, simulating both dry and wet rubbing conditions. Dry rubbing involves rubbing the ink surface with a dry white cotton cloth, while wet rubbing uses a white cotton cloth moistened with water.
    Laboratory Drying Oven Model Selection - Difference Between Forced Air Convection and Non-Forced Air Convection
    This article on the selection of laboratory drying ovens primarily introduces the differences between forced convection (air-blowing) and natural convection (non-air-blowing) drying ovens.
    Surface Absorbency Tester for Predicting Drying Speed of Printing Ink on Coated Paper
    This article explores how the surface absorbency tester predicts the drying speed of ink on coated paper. Traditional methods rely on actual printing tests, which are time-consuming and difficult to quantify.
    Rapid temperature change high and low temperature test chamber for thermal fatigue evaluation of PCB board solder joints.
    This paper discusses the application of rapid temperature change high and low temperature test chambers in evaluating the thermal fatigue of PCB board solder joints. Solder joint fatigue is primarily caused by differences in material thermal expansion, and the test chamber simulates thermal stress through temperature cycling to accelerate the fatigue process.
    Application of Three-Chamber High and Low Temperature Test Chambers in Rapid Temperature Cycling for Electronic Products
    The three-chamber high-low temperature test chamber is used for reliability testing of electronic products, enabling rapid temperature transitions through independent high temperature, low temperature, and test zones. Compared to traditional single-chamber equipment, it reduces temperature change time and enhances testing efficiency.
    Safety Considerations for Selecting Explosion-Proof vs. Ordinary Drying Ovens in Paint Laboratories
    When selecting a drying oven in a paint laboratory, the type should be determined based on the safety risks of the samples and the environment.
    Research on the Stepwise Curing Process of Coatings Using Multi-Stage Temperature Control Ovens
    This article investigates a novel process for achieving stepwise curing of coatings using a multi-stage temperature-controlled oven.
    High and low temperature alternating test chamber for measuring low-temperature embrittlement temperature of plastics
    This article introduces how to use a high-low temperature alternating test chamber to determine the low-temperature brittleness temperature of plastics.
    Thermal shock test chamber measures the thermal shock resistance of polymer films.
    This article introduces how to test the thermal shock resistance of polymer films using a thermal shock test chamber. The test involves rapidly switching the film between high and low temperatures to simulate the drastic temperature changes that may occur in actual use, thereby generating thermal stress within the material.
    Thermal Shock Test Chamber Measures Film's Temperature Change Resistance
    The thermal shock test chamber creates thermal stress inside the film by rapidly switching between high and low temperature environments, testing its resistance to temperature changes. During the test, key parameters such as temperature range and dwell time need to be set, and the film is observed for issues such as cracking or performance degradation.
    The coating machine applies the adhesive layer of the plaster patch onto the backing layer.
    The coating machine applies adhesive evenly onto the backing material through steps such as feeding, coating, drying, and winding, forming a stable adhesive layer.
    The oral dissolving film is uniformly coated by a film applicator and then dried and formed.
    Oral dissolving films are prepared by a coating mechanism, where a liquid containing film-forming materials is uniformly applied onto a substrate, followed by drying to remove the solvent and form a solid film.
    Flash point tester for determination of closed cup flash point of varnish
    This article introduces the method for determining the closed-cup flash point of varnish using a flash point tester. The flash point refers to the minimum temperature at which the vapor on the surface of the varnish ignites momentarily when exposed to a flame after heating. It is a crucial indicator for assessing the fire risk during its production, storage, and transportation.
    Determination of dry matter content in pulp using an electric thermostatic drying oven.
    This article introduces the method for determining the dry matter content of pulp using an electric thermostatic drying oven. Dry matter content is a key indicator for evaluating pulp quality. The principle of determination involves evaporating the moisture in the pulp through heating and calculating the content based on the mass difference before and after drying.