The kit can realize automatic grinding fineness Gauge operation, improve test Repeatability, suitable for standard scraper fineness Meter supporting use, simplify the experimental process.
Measurement accuracy of +/- 2 microns, wear resistance and corrosion resistance, handheld operation, suitable for rapid detection of various material fineness.
Made of stainless steel, the groove width is 12mm, Graduation 1.5μm, with a single groove design, suitable for fineness measurement in the range of 0-15 microns.
The multi-groove coating scraper can scrape 10 wet-films of different thicknesses at one time, the thickness difference of adjacent films is 25um, and the wide film thickness range of 50-675um is supported. It is convenient to visually observe the sag situation by placing the test plate vertically.
Double groove structure with graded slope design, Measurement accuracy of +/- 2 microns, wear-resistant and anti-corrosion stainless steel material, hand-held operation, suitable for rapid detection of various material fineness.
Double groove structure can be measured twice at the same time, Measurement range 0~ 25μm, accuracy +/- 2μm, hardened stainless steel material wear and corrosion resistance, suitable for a variety of material fineness detection.
Adopt double groove grading slope design, range 0~ 500μm, accuracy +/- 2µm, wear-resistant and anti-corrosion hardened stainless steel material, handheld operation can quickly determine the fineness of various materials.
It can measure the surface roughness of the groove with a width of more than 3mm and a groove depth of less than 10mm, and can also measure the plane and cylinder. It can be stably detected with a special measurement platform.
It can measure the groove surface roughness with a groove width greater than 2mm and a groove depth less than 3mm, and supports both flat and cylindrical measurement. It can be accurately detected with a special measurement platform.
Tool steel hardened and polished, accuracy +/- 2μm, range 0-250μm, ergonomic design for easy holding, suitable for particle size and fineness of grinding inspection.
Tool steel hardened and polished, accuracy +/- 2μm, range 0-15μm, ergonomic design, easy to hold, suitable for particle size and fineness of grinding detection.
The scraping speed is adjustable from 10-100mm/s, and the drawdown blade load 1.75-6 kg is adjustable. It is used with High Accuracy GrindoMeter to avoid personnel operation errors and improve test conformity.
Tool steel hardened and polished, accuracy +/- 2μm, range 0-100μm, suitable for particle size and fineness of grinding inspection, ergonomic design for easy grip.
Double groove design can achieve rapid fineness detection, Measurement range 0~ 100μm, accuracy +/- 2 microns, wear-resistant and anti-corrosion stainless steel material, suitable for a variety of material fineness determination.
Made of stainless steel, the range is 0-100μm, Graduation is 5μm, and the plane flatness of the scraper is 0.003mm to ensure accurate and reliable particle fineness measurement.
