Handheld Irradiance Meter

The handheld irradiance meter converts light signals into electrical signals through a photoelectric sensor to measure the radiant power received per unit area. It is used to detect the intensity of light sources such as ultraviolet curing lamps and sunlight, confirming lighting conditions in applications like printing curing, paint drying, and environmental monitoring.
Selection
Select the UV/Visible/Full Spectrum model based on the measurement wavelength range, and ensure the measurement range covers the application requirements. Consider the sensor type and accuracy; silicon photodiodes are suitable for routine measurements. Pay attention to the cosine response characteristics of the probe. A handheld portable design facilitates on-site use. Verify the calibration certificate and protection rating.

Terms

Standards

Instruments

The speed can reach 30000rpm, the processing capacity is 0.1-1000 ml, the 316L stainless steel dispersion head is corrosion-resistant and high temperature-resistant, and the handheld lightweight design is easy to operate with one hand. It is suitable for rapid shearing and crushing of samples in small containers.

$ 680.00

The rotating speed can reach 30000rpm, the processing capacity is 1-250ml, the handheld lightweight design is suitable for a small amount of samples in a small container, and the corrosion-resistant stainless steel dispersion head is used for easy disassembly and cleaning. Double insulation protection ensures safety.

$ 709.00

Measurement range 58~ 92% Brix, minimum reading 0.002, scale reading mode, compact shape only 155mm long, Net weight 160g for handheld operation, suitable for a variety of liquid concentration detection.

$ 122.00

Rotation speed 5000~ 30000rpm, Processing capacity 0.2~ 80ml, handheld operation is light and convenient, suitable for outdoor or laboratory mobile use, providing High Accuracy stainless steel cutter head.

$ 880.00

Handheld, lightweight and portable, large-capacity battery supports outdoor mobile operation, Rotation speed 5000-30000rpm, Processing capacity 0.2-150 ml, stainless steel material corrosion resistance, double insulation protection is safe and reliable.

$ 517.00

Suitable for medium-hardness rubber, thermoplastic elastomers, and plastics, with a measurement range greater than 90 HB and less than 20 HD, compliant with ASTM D2240 standard, and supports both handheld and benchtop usage modes.

$ 178.00

Designed with a large outer diaMeter of 22mm, Processing capacity range of 10-100ml, suitable for handheld devices, length 101mm for easy operation, internal thread aperture 8mm to ensure stable connection.

$ 199.00

Rotation speed 5000~ 30000rpm, Processing capacity 0.2~ 80mL, stainless steel working head corrosion resistance, large capacity battery supports outdoor mobile operation, suitable for a variety of cutter heads.

$ 767.00

Measurement range 0~ 50% Brix, minimum reading 0.005, scale reading mode, compact shape only 155mm × 25mm × 40mm, Net weight 160g easy to carry.

$ 122.00

Using DSP chip for control and data processing, Measurement range up to 160μm, support Multi-ParaMeter measurement, compatible with multiple national standards, built-in large-capacity lithium battery can work continuously for more than 50 hours.

$ 1243.00

Measurement range 0~ 5% Brix, minimum reading 0.10% Brix, scale reading mode, compact and portable, weighing only 160g, suitable for fast on-site inspection.

$ 122.00

With camera view function to prevent measurement deviation, Repeatability Delta E * ab 0.05, Support SCI and SCE dual Measurement mode, store 20000 data, suitable for a variety of environment operation.

$ 3543.00

Measurement range 0~ 60% Brix, minimum reading 0.005, scale reading mode, small shape only 155mm, light weight 160g, easy to quickly detect on site.

$ 122.00

Measurement range 45~ 82% Brix, minimum reading 0.005, Dimension 155 * 25 * 40mm, weight only 160g, easy to quickly detect on site.

$ 122.00

With 0~ 20% Brix Measurement range and 0.001 minimum reading, using scale reading mode, the small shape is only 155mm, which is convenient for quick detection of liquid concentration on site.

$ 122.00

Articles

Application of Xenon Lamp Aging Test Chamber in Automotive Coatings ASTM G155
Xenon lamp aging test chambers simulate environmental conditions such as solar radiation, temperature, and humidity to evaluate the weather resistance of automotive coatings under the ASTM G155 standard.
In the selection of illuminance meters, sensor type and measurement range are key considerations.
This article introduces the key points for selecting sensor types and measurement ranges when choosing an illuminometer.
UV aging test machine evaluates the UV resistance of ink.
This article introduces how to test the UV resistance of ink using a UV aging test chamber. The equipment accelerates aging by simulating ultraviolet light and controlling temperature and humidity, with key testing conditions including temperature, irradiance, and cycle time.
Xenon lamp aging test chamber for testing the weather resistance of exterior wall coatings.
Xenon lamp aging test chambers accelerate the aging of exterior wall coatings by simulating environmental conditions such as sunlight, temperature, humidity, and rainfall, to evaluate their weather resistance. The tests are conducted in accordance with standards such as ISO and ASTM, controlling key parameters such as irradiance, temperature, humidity, and spray cycles.
UV aging test chambers are used for the aging evaluation of polymer materials.
The UV aging test chamber accelerates the aging process of polymer materials by simulating ultraviolet radiation from sunlight, combined with temperature and humidity control, to evaluate their durability.
What are the differences between a vacuum oven and a conventional oven?
The main difference between a vacuum oven and a conventional oven lies in their working pressure. Conventional ovens operate at atmospheric pressure, heating through air convection, making them suitable for routine drying tasks. In contrast, vacuum ovens are evacuated to low pressure to reduce air presence, primarily relying on thermal radiation for heat transfer. This makes them ideal for processing heat-sensitive, oxidation-prone materials or those requiring thorough drying.