Equipped with a heated vacuum bed, the temperature can reach 100 ° C, the coating speed range is 0.1~ 500mm/s, Travel 415mm, supports a variety of film tools, and the intelligent interface simplifies the operation.
Using the immersion coating method, Spreader thickness 0.3-10 mm adjustable, mechanical speed 1.2m/min, built-in glue circulation system to ensure uniform and stable Spreader.
The application width is adjustable from 100-400mm, the thickness range is 0.005-3mm, the rubber roller is heated to 200 ° C, and the drying temperature reaches 200 ° C to realize the continuous roll-to-roll film.
The equipment adopts the immersion coating method, the effective application width is 500mm, the mechanical speed is adjustable 1.2m/min, and it is equipped with Air-Cooled system and cross-cutting device to ensure efficient and uniform coil processing.
The use of Bath coating method, effective application width 500mm, mechanical speed 1.2m/min adjustable, external infrared heating temperature control 50-150 ℃, Air-Cooled system to ensure efficient cooling down and coil mass.
Equipped with perforated heated vacuum bed, the temperature can be increased to 100 ° C, the coating speed range is 0.1-500 mm/s, and the bar and Blade Coating methods are supported to ensure uniform film thickness and sample repeatability.
The DL Impact device is suitable for small space testing, dual coil technology ensures good Repeatability and accuracy, Measurement accuracy +/- 12HL, built-in Direction Sensor automatically compensates for measurement errors.
The integrated structure is compact and portable, and the dual-coil technology is used to ensure good Repeatability and Measurement accuracy. The built-in Direction Sensor automatically compensates for errors, and supports a variety of Hardness standard conversions.
Adopt double roll extrusion method to achieve 0.3-10 mm Spreader Film thickness, accuracy of +/- 0.05mm; Equipped with hot air circulation Oven, Temperature range room temperature to 200 ℃ +/- 3 ℃; Tension controller automatically controls the unwinding process to ensure the uniformity of Spreader.
Using split design, the probe and the host are connected by aviation plug, equipped with digital dual coil probe technology, Measurement accuracy can reach +/- 6HL, support a variety of Hardness standard automatic conversion, with 360 ° direction automatic compensation function.
The C-type Impact device has a small impact force and is suitable for surface hardening and thin-walled component testing; dual coil technology ensures +/- 6HL typical accuracy; built-in directional Sensor automatically compensates for errors; supports 5 Hardness standard conversions.
Multi-coil structure design, protective layer thickness Measurement range 1-185mm, accuracy +/- 1mm, with four scanning modes and ultra-dense rib resolution, support one-hand grip operation.
Multi-coil structure design, protective layer thickness Measurement range 1-185mm, accuracy +/- 1mm, with four scanning modes and ultra-dense rib resolution, support one-hand grip operation.
Measurement accuracy up to +/- 6HL with digital dual coil probe technology, support for a variety of Hardness standard automatic conversion, with 360 ° direction automatic compensation function, can be adapted to four different Impact devices to meet diverse measurement needs.
Using drawdown blade and roller coating double Spreader head device, Spreader thickness range of 0.005-3mm, drying temperature up to 200 ℃, with automatic correction and precision thickness adjustment function.
