High Accuracy Stepping Control system, support HR, HB, HV conversion scale, large test space, Built-in Printer and RS-232 interface, suitable for a variety of hardness of materials.
With three Adjustments, it can simultaneously measure Richter, Brinell, Rockwell and other Hardness values, indication Repeatability 6HLD, support 360 ° measurement direction, standard D-type Impact device and optional Miscellaneous type, anti-vibration Impact electromagnetic interference.
Impact energy 11mJ, Impact device mass 50g, ball head diaMeter 3mm, Hardness measurement hole or cylinder, suitable for a variety of metal hardness of materials testing.
Support six kinds of Hardness standard conversion, equipped with high luminance LED backlight, metal shell anti-interference, standby time up to 100 hours, can store 600 sets of data, adapt to various harsh environments.
The device adopts D-type Impact device, supports 360 ° measurement, can display a variety of Hardness standards, has 600 sets of Data storage capacity, is small in size and weighs only 0.2kg, and has a standby time of 100 hours. It is suitable for small spaces and field environments.
The use of New material has a long life, stable fullness point and correction point, and can measure 0.6-8 mm thickness materials. Hardness value can be converted into Vickers, Rockwell and other standards.
The use of New material has a long life, stable fullness point and correction point, Hardness value can be converted into Vickers Rockwell Brinell, the range is 0-20HW, and the accuracy is 0.5HW, which is suitable for workpieces with a thickness of 0.6-13 mm.
The mechanical compression spring device is not easy to damage, the accuracy is up to 0.5HW, the film thickness 0.4-6 mm workpiece can be detected, and various Hardness values such as Brinell Rockwell can be obtained through the conversion table.
The Che design can be operated with one hand, the test range is equivalent to Brinell 25-135HB, and the measurement can be completed on one side without support. It has the function of extreme value retention and average calculation of 29 sets of data.
It can directly display six Hardness standards, support 360-degree measurement direction, store 600 sets of data, and operate continuously for 10 hours with lithium battery power supply. It is compact and portable and weighs only 110 grams.
It can be extended by 50mm, and up to 2 pieces can be installed to achieve 100mm deep hole measurement; it is suitable for deep hole internal surface roughness detection, and needs to cooperate with the measurement platform to ensure Stability.
Impact energy 11mN, Impact device mass 75g, can measure the inner surface of the inner hole or narrow space, suitable for a variety of specimen types and surface conditions.
Measurement range 20~ 1000J/m ², resolution 0.1J/m ², with Touchscreen operation and thermal printing function, suitable for a variety of Cardboard Internal Bond Strength accurate determination.
It can measure the surface roughness of the hole with an aperture greater than 2mm, and the maximum depth is 9mm. It supports both flat and cylindrical measurement, and is suitable for a variety of special-shaped surface detection needs.
Imported special steel pressure needle, Hardness and long life, range 0-20HW, can directly read the Hardness value, suitable for on-site rapid testing, Stability and portability.
