Thrust sampling mode, cutting edge pressure sample 25mmx100mm and gluing sample 25mmx80mm, sampling thickness range of 18mm, suitable for Corrugated Board and carton mass detection.
Can cut 25 * 100mm sample, sampling error +/- 0.5mm, sampling thickness range of 18mm, fast and accurate completion of Corrugated Board Edge Crush Test and adhesive strength test sample preparation.
It can cut 32.2cm ² and 64.5cm ² samples, the sampling error is less than 0.5cm ², and the maximum sampling thickness is 15mm, which meets the accurate sampling requirements of Corrugated Board Flat Crush Test.
Suitable for a variety of Corrugated Board adhesive strength test, equipped with different specifications of steel needles, needle diaMeter range 1.0-3 mm, support A, B, C, E corrugated test, sample size 25 × 80mm.
The fixture can fix the upper and lower ends of the butterfly specimen into a vertical shape, test the vertical compression strength, suitable for a variety of Corrugated Board types, Dimension 150 * 105 * 65mm, weight about 2Kg, easy to operate.
Using Taiwan SDI blade and Japan SK4 high carbon steel material, sharp and durable; sampling accuracy +/- 0.5mm, thickness range ≤ 10mm; novel design, flexible sampling standardization, less burrs.
The imported sliding track is used with the blade to cut multi-layer Cardboard samples, the sampling size error is +/- 0.5mm, the sampling thickness range is 18mm, the scale laser engraving is clear and wear-resistant, and the strong magnet is convenient for blade installation.
Equipped with A/B/C/E four kinds of corrugated pins, the diaMeter of the pins is Φ 2-3mm, the straight line is arranged without bending, and the unit length Corrugated Board gluing line can be separated to meet the testing needs of different sizes of paper pRoducts.
The linear guide is used to ensure smooth and fast sampling, and the imported tungsten sheet is cut without burrs and durable. It supports 18mm thickness sampling, and can cut 25 × 100mm and 25 × 80mm samples.
Adopting imported sliding track and blade, it can cut samples with accurate parallelism, Measurement range 10~ 1000mN, cutting size 100 × 60mm, scale laser engraving clear and wear-resistant.
Equipped with long and short pin holders and Φ 3mm and Φ 2mm pins, the pin axis is less than 1/100 after the parallelism error combination to the bottom surface, and less than 1/200 when the force is 300N, making it easy to operate without adjustment.
Measurement range 0-20mm, accuracy 0.01mm, contact pressure 20 +/- 0.5kPa, contact surface diaMeter 35.7mm, suitable for a variety of sheet material thickness detection, to ensure high parallelism and Precision.
Measurement range 0-20mm, accuracy of 0.01mm, 4 point positioning concentricity design and horizontal parallel positioning system to ensure measurement Stability and Repeatability.
Sampling area 100cm ² and error +/- 0.35cm ², removable knife edge sharp handle, with anti-cutting hand protection device, can handle Paper thickness 0.1~ 1.2mm and Corrugated Board 0.1~ 7mm.
The triangular pyramid Impact head with optimized friction resistance of only 0.1J is equipped with a self-tightening anti-loosening fixture and an LCD display interface. Measurement range covers 1-48J and supports automatic statistics and printing of test results.
