Rotation speed 0-3000rpm, fineness of grinding can reach 10um or less, double-decked chill down jacket is used to control temperature rise less than 10 ℃, electric lifting operation is convenient, zirconia bead grinding medium to achieve efficient dispersion and ground synchronization.
Electric lifting design to achieve dispersed ground synchronization, maximum Rotation speed 3000rpm, fineness of grinding up to 10um or less, configuration double-decked chill down jacket temperature rise less than 10º, zirconia bead medium to ensure efficient grinding.
The equipment adopts electric lifting and frequency conversion speed regulation, Rotation speed 0-3000 rpm, equipped with double-decked chilled down jacket and zirconia bead grinding medium to achieve efficient wet dispersion grinding, small temperature rise and easy operation.
Rotation speed of 10000rpm is achieved by using 750W three-phase asynchronous motor, and the electric lifting platform supports 300mm Travel, which can handle 10L materials and work continuously for a long time.
Rotation speed 3000rpm with zirconia bead grinding medium, fineness up to 10um or less; double-decked chilled down jacket design makes the operating temperature rise less than 10º; electric lifting structure is easy to operate and clean, suitable for medium and low viscosity material processing.
Using electric lifting platform and three-phase asynchronous motor, the speed range is 0~ 2880rpm, the maximum processing viscosity is 30000cp, the operation is stable and the noise is small, it can operate for a long time, the dispersion disc is resistant to corrosion and easy to disassemble.
The equipment can complete two processes of dispersion and grinding at the same time, Rotation speed 0-1500rpm, grinding capacity 30-100L, using zirconia grinding medium and chill down jacket design, temperature rise is small, easy to operate.
Rotation speed up to 3000rpm, fineness of ground up to 10 microns, equipped with double-decked chill down jacket to make the temperature rise less than 10 degrees, electric lifting design easy to operate and easy to clean.
Adopt electric lifting system and frequency conversion speed regulation technology, Speed range 60~ 6900rpm, Power 1100W, equipped with dispersed impeller and sand grinding blades, can adapt to different impeller diaMeters, support chilling down water circulation temperature control.
Electric lifting platform equipped with 500mm Travel, 0~ 2880rpm stepless speed range, the maximum processing viscosity of 30000cp, using stainless steel dispersion disc and three-phase asynchronous motor, stable operation noise, can run for a long time.
The equipment integrates dispersion and stirring functions, lifting Travel 250mm, with a maximum processing viscosity of 100000mPa.s. It adopts a dual-axis constant force lifting structure, resulting in stable operation and uniform mixing.
Set dispersion and stirring functions in one, lifting Travel 250mm, speed range 100~ 8000rpm, dual-axis constant force lifting to ensure stable operation, processing viscosity up to 100000mPa.s.
Brushless DC motor to avoid replacing brushes, electric lifting operation labor-saving, Power 3.7KW, speed range 30-3000rpm, with Rotation speed display function.
Adopt 1500W three-phase asynchronous motor, Rotation speed 0-2800rpm adjustable, equipped with a variety of stator head to adapt to different viscosity materials, electric lifting 500mm Travel easy to operate, turn stator gap small shear fineness.
Rotation speed up to 3000rpm, line speed up to 33m/s, Processing capacity 10-40L, using electric lifting and double-end sealing structure, uniform dispersion and vacuum sealing defoaming effect is good.
