Using sinusoidal fixed displacement vibration mode, Frequency adjustable, amplitude of 25.4mm, test load 120kg, silent belt drive running smoothly, guide clamping to ensure stable testing.
Adopt reciprocating friction method, Friction Frequency 0~ 2.5Hz, Test Travel 12.7~ 50.8mm, can simulate coating abrasion during transportation, support continuous test 0~ 24 hours.
Using reciprocating motion to simulate transportation abrasion, Friction Frequency 0~ 2.5Hz adjustable, Test Travel 12.7~ 50.8mm, support continuous test 0~ 24 hours, suitable for a variety of can sizes and pressure conditions.
Test speed of 1.2mm/s and press depth of 8mm, equipped with 5-20mm multi-specification narrow width sample table, slot-die parallelism error ≤ 0.05mm, to ensure accurate and reliable softness measurement.
Humidity environment can be simulated according to the national standard design, with 500g measuring device and 1cm ² flat bottom area, easy to operate and accurate results.
Test speed 0-5km/h adjustable, time setting 0-999.9 hours, equipped with bumps plate and belt, simulated travel bumps friction, automatic shutdown function to ensure safe and reliable testing.
High Accuracy Electromagnetic Force Sensor, Capacity 320g, readability 0.1mg, support automatic internal calibrating and multiple weighing units, equipped with transportation protection devices.
High Accuracy Electromagnetic Force Sensor, Capacity 320g, readability 1mg, support for external calibrating and multiple weighing units, equipped with transportation protection devices to ensure safety.
With simulated D65 light source and a 150mm integrating sphere, it can complete fluorescence whiteness testing with one click, eliminating the need for manual switching. It features a dust-proof structure that effectively protects the optical system, ensuring accurate and stable measurements.
The equipment is driven by a servo motor, with an adjustable clamping speed of 5-50mm/min, a maximum allowable specimen height of 2.2 Meters, and four splint Sensors and LCD screens to achieve automatic shutdown and safety protection.
With IP67 waterproof rating, it can be dustproof and waterproof. Built-in Probe temperature measurement range is -20.0 to 60.0 ° C, with accuracy +/- 0.2 ° C. Supports single channel up to 16,000 reading storage, and is equipped with high and low alarm LED prompts.
With three standard test modes of strength, fixed value and stacking, the test space is 600 * 600 * 600mm, the accuracy reaches +/- 0.5%, and the stacking test can be carried out for 12 hours or 24 hours.
With three standard test modes of strength, fixed value and stacking, the test space is 1400 * 1400 * 1400mm, and the accuracy is within +/- 0.5%. It can be stacked for 12 hours or 24 hours, meeting the requirements of national standards.
The use of low-energy centrifugal fans makes the airflow uniform and stable, with an average wind speed of 0.25 to 0.45m/s and noise less than or equal to 62dB (A). The mirror stainless steel countertop is corrosion-resistant and easy to clean, and the tripod and cabinet are separated for easy transportation.
The demoulding frame design effectively reduces the accumulation of edge paints, is equipped with 4mm suspension hole to achieve non-marking vertical horizontal suspension, 0.8mm steel plate substrate to ensure test Stability, PE protective film to prevent transportation damage.
