Operating Pressure 0-5MPa adjustable, PID intelligent temperature control accuracy +/- 3 ℃, hydraulic system with long-term pressure holding function, press plate Travel 200mm, suitable for hot pressing and hot calendering experiments, to meet the QB/T3703-1999 standard requirements.
The thermostat is used to control the heat transfer of the heating tube, the temperature accuracy is +/- 2 ℃, and the heating range is adjustable from room temperature to 250 ℃; it is equipped with light curtain protection device and temperature abnormal alarm function, and the operation is safe and reliable; the parallelism of the upper and lower templates is within 0.05 to ensure uniform pressure.
The equipment has 200x200mm hot pressing area, temperature control accuracy +/- 2 ℃, heating temperature up to 250 ℃. Using light curtain protection and safety protection design, the upper and lower templates have high parallelism, and the hot pressing time, temperature and pressure can be adjusted.
Horizontal press measurement combined with a physical positioning observation window, with repeatability accuracy dE*ab ≤ 0.02. It supports 5 measurement apertures and over 30 measurement parameters, and enables color data sharing through a mobile application.
The equipment adopts High Accuracy modular Spreader station, all-electric control without air source, minimum glue thickness 0.01mm, Spreader speed 2-4.5 m/min adjustable, with electronic control precision tension to adapt to a variety of materials such as paper, plastic and metal film.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Maximum Spreader width up to 1000mm, Spreader speed 1-10m/min adjustable, support unlimited length Spreader and automatic winding, forward and reverse stepless speed change, discharge and receiving reel tension adjustable, heating Rod and glue slot can be quickly disassembled to clean up residual glue.
Using scraping method to achieve 0.005-3mm wet film thickness, Spreader accuracy of +/- 5%, equipped with hot air circulation Oven and automatic constant tension control to ensure Spreader uniformity and Stability.
Pneumatic pressure mode, low noise and easy to adjust, Operating Pressure 0~ 0.9MPa adjustable, cylinder diaMeter 63mm, nominal force 45~ 80Kg, lightweight structure, comfortable operation.
Wet film thickness adjustment range 0.005-3mm, Spreader accuracy +/- 5%, using servo drive and PLC control to achieve 1-10m/min adjustable coating speed, with automatic tension control and hot air circulation oven.
Using roll-to-roll continuous solution pool mode, the width of the substrate is 200mm, and it is dried by 130 ° C hot air Oven; the solution pool can be lifted and heated, and PLC control ensures stable operation, which is suitable for a variety of substrate processing.
The equipment adopts dual-station synchronous unwinding and thermostatic hot pressing technology, the bonding speed is adjustable from 2-10m/min, the hot pressing temperature is room temperature to 200 ° C, the line pressure is 5-50N/mm, and it is equipped with automatic deviation correction and full closed-loop tension control to ensure the material alignment accuracy and stable winding.
Adopt gear pair drive, hand-pressed operation, rated load 500N, Travel 70mm, the upper and lower height of the frame can be adjusted, Force Gauge has a positioning structure, suitable for batch testing.
Horizontal press measurement with physical positioning observation window, Repeatability accuracy up to dE * ab ≤ 0.02, support 5 measurement diaMeters and over 30 Measurement paraMeters, equipped with full band equalization LED Illuminant, Measurement time of about 1 second.
Using a roll-to-roll continuous solution cell process, the substrate is crystallized or attached under specific conditions. Equipped with a 130 ° C hot air Oven drying system, the effective application width is 180mm, and the mechanical speed range is 0.1-300 mm/min. The solution cell has a lifting function and a separate heating design to ensure process Stability and operation safety.
