Automatic ink running stability, ink time and speed can be set, printing pressure 0~ 2mm adjustable, provide low, medium and high three printing speed, each time can be proofed 4 colors to facilitate Color contrast.
The equipment supports 0-2MM pressure adjustment, providing three-speed printing speed (10/15/20 rpm) and uniform ink speed (650/800/1000rpm), which can imprint 2.5mm thick paper and 1mm plastic film to achieve precise uniform ink and stable operation.
The printing pressure can be adjusted accurately according to the thickness of the material, and the printing speed can be adjusted. It provides 4 primary color areas and 4 light color areas to ensure that the pattern is clear and tidy.
Using 15.5cm/min ink wiping speed, equipped with 0.1mm ink coating platen, the test process is precisely controlled by 4.3 inch Touchscreen, which can accurately determine the absorption capacity of the material to the inks vehicle.
It can simultaneously print color bars of different Colors or Ink Film thickness, detect inks Hue and Gloss, uniform ink time can be adjusted from 1 to 800 seconds, support dry and wet ink discoloration analysis and abrasion resistance testing.
The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
Using 180LPI metal anilox roller with 70mm print width, four pyramidal net hole structure to ensure the ink transfer evenly, the handle design in line with ergonomic operation labor-saving.
The printing speed is 0~ 260m/min, the accuracy is less than 0.5, which supports data management and characteristic detection, and can reduce the number of proofing and material waste.
Can accurately test whether the surface tension is up to standard, support ink Color and tip shape customization, suitable for a variety of printing composite process.
Using 180 wire metal engraving roller to control the ink film thickness, four pyramidal mesh structure to ensure uniform Spreader, simple operation and easy cleaning, can quickly prepare samples similar to flexographic printing effect.
Using 220LPI line number stainless steel anilox roller, printing surface width 70mm, mesh shape is quadrilateral pyramid, wet film thickness is inversely proportional to the number of lines, suitable for proofing of different inks.
Adopt automatic ink leveling system, ink leveling time adjustable, three-speed ink leveling speed 400-700rpm, printing speed 0-1000rpm frequency conversion adjustable, equipped with German imported rubber roller, support different materials substrate.
Using 400 wire metal anilox roller to control the ink film thickness, flexographic samples can be quickly prepared, easy to use and clean, and the repRoducibility is very similar to that of conventional flexographic printing.
Using microcomputer automatic control, the ink wiping speed is 15.5 +/- 1.0cm/min, the opening area of the ink coating platen is 20 +/- 0.4cm ², and the automatic adjustment range of paper pattern thickness is supported by 0.1~ 1.0mm. Test accuracy and operation convenience are ensured.
Using 100LPI line number and quadrilateral pyramid hole structure, the transfer uniformity of inks is precisely regulated through hole shape and line number, which affects the wet film thickness and ensures the stability of ink supply.
