Impact energy 11Num, Impact device mass 50g, suitable for measurement of grooves or concave surfaces, is an optional Impact device from Leeb Hardness Tester.
Using split design, the probe and the host are connected by aviation plug, equipped with digital dual coil probe technology, Measurement accuracy can reach +/- 6HL, support a variety of Hardness standard automatic conversion, with 360 ° direction automatic compensation function.
Digital probe technology implementation signal direct processing, strong anti-interference ability, Measurement accuracy +/- 12HL, built-in direction Sensor automatic compensation Impact direction error, support 8 kinds of Hardness standard automatic conversion, weight only 270 grams easy to carry.
Measurement accuracy up to +/- 6HL with digital dual coil probe technology, support for a variety of Hardness standard automatic conversion, with 360 ° direction automatic compensation function, can be adapted to four different Impact devices to meet diverse measurement needs.
Split design can be matched with a variety of Impact devices, using digital dual coil probe technology, Measurement accuracy of +/- 6HL, support 360 ° automatic direction compensation, built-in a variety of Hardness standard automatic conversion, with statistical and QC two Measurement modes.
Split design with four Impact devices, digital dual coil probe technology to ensure +/- 6HL Measurement accuracy, automatic direction compensation to achieve 360 ° measurement, support a variety of Hardness standard automatic conversion, to meet different detection needs.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
Can be connected to Leeb Hardness Tester directly print measurement data, support a variety of surface Measurement range including R10-R50 cylindrical surface and SR10-SR30 sphere, easy data recording.
Dimensions of special-shaped support ring, suitable for HM6560 Leeb Hardness Tester, ensure stable support on complex surfaces, improve Measurement accuracy and applicability.
Measurement accuracy +/- 6HL, support 360 ° automatic direction compensation, built-in 8 kinds of Hardness standard automatic conversion, with statistical and QC two detection modes.
Impact energy 11mN, Impact device mass 80g, suitable for measurement of slender narrow groove, can meet the needs of different shapes and sizes of workpiece Hardness detection.
Measurement range 0~ 1250 microns, wear-resistant material design, suitable for LEEB221 and LEEB222 models, suitable for nonmagnetic metal substrate insulation coating detection.
Adopting the principle of magnetic Induction Thickness Measurement range 0~ 1250 microns, suitable for LEEB242 models, can be connected to the printer output data, suitable for nonmagnetic Coating thickness detection on magnetic metal substrates.
It can extend the measurement length, suitable for long-distance measurement in narrow areas, and supports a variety of curved surface Measurement ranges, including outer cylindrical surface R10-R50, inner cylindrical surface R11-R30 and other specifications.
Impact energy 11N, Impact device mass 75g, suitable for general-purpose part measurement, can be measured with a minimum thickness of 3mm, and a minimum diaMeter of 0.35mm.
