The three-roll extrusion grinding principle is used to process materials with a viscosity of up to 3 million cps. The roller can control the temperature rise through chilled down water. The roller speed range is 23-178rpm. It supports the customization of ceramic materials such as zirconia and is suitable for paste grinding with high fineness requirements.
The equipment adopts electric lifting and frequency conversion speed regulation, Rotation speed 0-3000 rpm, equipped with double-decked chilled down jacket and zirconia bead grinding medium to achieve efficient wet dispersion grinding, small temperature rise and easy operation.
Rotation speed up to 3000rpm, fineness of grinding up to 10 microns or less, double-decked chilled down jacket design temperature rise less than 10 ℃, equipped with zirconia bead grinding medium to achieve efficient wet grinding, separation plate using whole CNC processing life is long.
Rotation speed up to 3000rpm, fineness of grinding up to 10 microns or less, equipped with double-decked chill down jacket temperature rise of less than 10 degrees, zirconia bead grinding medium and CNC separation plate design, easy to operate and clean.
Rotation speed 0-3000rpm, fineness of grinding can reach 10um or less, double-decked chill down jacket is used to control temperature rise less than 10 ℃, electric lifting operation is convenient, zirconia bead grinding medium to achieve efficient dispersion and ground synchronization.
Set grinding, dispersion, stirring functions in one, using electronic speed line, digital display Rotation speed, Motor Power 400W, Lift Travel 200mm, suitable for a variety of experimental needs.
The surface of three rollers is extruded and rubbed at different speeds to achieve grinding. The diaMeter of the roller is 65mm, and the fineness of grinding can reach 15μm. It is suitable for fine grinding and dispersion of high viscosity materials.
The three-phase asynchronous motor has high spark-free safety performance, can handle high viscosity materials and work continuously, the grinding medium is 1.6-1 zirconia beads, and the fineness of grinding is good and easy to clean.
Rotation speed up to 3000rpm to achieve efficient grinding, fineness up to 10μm or less; double-decked chill down jacket design makes the operating temperature rise less than 10 ℃, to ensure material Stability; zirconia bead grinding medium, suitable for a variety of viscosity material processing.
Electric lifting design to achieve dispersed ground synchronization, maximum Rotation speed 3000rpm, fineness of grinding up to 10um or less, configuration double-decked chill down jacket temperature rise less than 10º, zirconia bead medium to ensure efficient grinding.
Rotation speed up to 3000rpm, fineness of grinding up to 10 microns or less, double-decked chilled down jacket design makes the conventional temperature rise less than 10 ℃, zirconia dial drive grinding medium to achieve efficient dispersion grinding.
Three rollers are used to squeeze each other and friction at different speeds to achieve grinding. The roller material is cold hard alloy cast iron, with surface Hardness HS70 ° or more, and the fineness of grinding can reach 15μm, which is suitable for high viscosity material processing.
Adopting three-roll extrusion friction grinding principle, Rotation speed 28-152rpm adjustable, fineness of grinding up to 15μm, Hardness HS70 ° above the surface of cold hard alloy steel roller, support water chilling down system, suitable for high viscosity material processing.
The equipment can complete two processes of dispersion and grinding at the same time, Rotation speed 0-1500rpm, grinding capacity 30-100L, using zirconia grinding medium and chill down jacket design, temperature rise is small, easy to operate.
The use of diamond sanding needles can flatten the surface of the grinding wheel, improve the utilization rate of abrasive wheels, and is equipped with a water supply system to support wet grinding and dry grinding. The size of abrasive wheels is about 250 × 30 × 32mm, and the Rotation speed is 1400rpm.
