The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
Hardness stainless steel material, Hardness 50~ 55HRC, accuracy up to +/- 2μm, smooth surface corrosion resistance, support non-standard customization and automatic film matching to ensure experimental accuracy.
Stainless steel material to ensure durability, wet film thickness 30-120μm optional, accuracy +/- 2μm, application width 60mm, can be used with Automatic Film Applicator.
Formed to achieve 52.6 micron precision film, 304 stainless steel material provides high Abrasion Resistance, 50mm at both ends of the hand part without additional handle, can be directly matched with the experimental Film Applicator.
High Hardness stainless steel material, Hardness of 50~ 55HRC, accuracy control in +/- 2 microns, smooth surface and support non-standard customization, can be used with automatic Film Applicator.
4-sided film equipment accuracy of +/- 2 microns, Spreader width of 250mm, high hardness stainless steel material, hardness 50~ 55HRC, corrosion resistance and wear resistance, support non-standard customization and automatic film matching.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Using stainless steel 1Cr17N2 material, wet film thickness 50-200μm adjustable, accuracy +/- 3μm, application width 60mm, suitable for low viscosity liquid Spreader, can be used with Automatic Film Applicator.
Spreader wet film thickness of 200 microns, groove design is not easy to block and easy to clean, to ensure the uniformity and accuracy of Spreader, support laboratory manual or Automatic Film Applicator.
Double-sided design can be coated with two pre-order film thicknesses 90 and 150 μm, Spreader width 20mm, suitable for Automatic Film Applicator and Drying Time Recorder, in accordance with ASTM D 823 standard.
Wear-resistant stainless steel material, wet film thickness 48.0μm, accuracy of 0.1μm, effective application width 30cm, suitable for High Accuracy film experimental needs.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0-10.5 mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Wire-wound design, film thickness 120 microns, total length 37.5cm, effective application width 25.5cm, stainless steel material to ensure durability and uniform Spreader.
Spreader effective area of 600mm * 800mm, Heating Temperature range RT +~ 180 ℃, Spreader accuracy +/- 0.003mm, Spreader Film thickness 0~ 10mm adjustable, using automatic feeding system and stepless speed control, improve film uniformity and efficiency.
Hardness stainless steel material, Hardness of 50~ 55HRC, film accuracy +/- 2μm, smooth surface to support a variety of Spreader requirements, can be used with Film Applicator to achieve automatic film operation.
