Test voltage 100-600V adjustable, short circuit current 1A +/- 0.1A, using platinum ElectRode high temperature corrosion resistance, drop height 30-40mm adjustable, time interval 30 +/- 1 seconds, automatically cut off the unqualified current.
The equipment adopts the principle of magnetic field magnetization, lifting force of 7.5Kg, Scanning range of 20~ 200mm, equipped with LED lighting and movable joints, suitable for the detection of various shapes of workpieces.
Test voltage 100-600V adjustable, short circuit current 1A +/- 0.1A, using rectangular platinum plating ElectRode, drop time interval of 30 +/- 1 seconds, with automatic cut-off protection function.
Using magnetic Induction and eddy Current principle, Measurement range 0~ 1250μm, resolution up to 0.1μm, equipped with wear-resistant hard metal probe and spring guide sleeve Probe, support automatic memory calibrating and RS232C communication.
Adopt magnetic yoke structure, lifting force up to 7.1kg, pole distance adjustable 0-220mm, Sensitivity to meet A1 test piece display requirements, suitable for welding and Pressure Vessel internal work.
It can detect 0.5-3 mm surface defects, detect a minimum width of 0.1 micron, and is equipped with four Probe to adapt to different shapes of workpieces. It is ergonomically designed for easy operation and control.
Adopt magnetic drive technology, Speed range 0-1800rpm, Maximum stirring capacity 2000ml, Compact and portable, Support charging function, Operating voltage 12V, Suitable for a variety of low viscosity liquid mixing applications.
Using rectangular platinum ElectRode, the ElectRode force is 1.0N +/- 0.05N, the test voltage is adjustable from 100 to 600V, and the voltage drop does not exceed 10% when the short-circuit current is 1.0 +/- 0.1A. The dripping device can accurately control the dripping volume and time interval.
Semiconductor Sensor to detect halogen gas leaks of less than 0.5 oz/year, Response Time ≤ 1 second, Sensitivity adjustable, Portable design weighing 250g, up to 9 hours of operation.
Measurement range 5~ 500μm, error +/- 10%, no power supply, durable, suitable for high temperature and difficult to contact surface measurement.
Using magnetic Induction principle to achieve nondestructive measurement, with a wide range of 0~ 12000 μm and +/- 3% error accuracy, supports automatic matrix recognition and single continuous dual mode measurement, with USB and Bluetooth data output interface.
Using magnetic Induction and eddy Current dual principle, Measurement range 0~ 500μm, resolution of 0.1μm, wear-resistant hard metal probe and Automatic calibration function, support USB data communication.
Using magnetic Induction and eddy Current principle, Measurement range 0~ 500um, resolution 0.1μm, wear-resistant hard metal probe and Automatic calibration function, support single and continuous Measurement mode.
Magnetic surface temperature measurement Probe through strong magnetic adsorption on the workpiece, small volume and light mass, Sensor and magnet insulation to ensure measurement accuracy, the highest temperature 480 ℃, especially suitable for circular workpiece surface.
Using magnetic Induction and eddy Current dual principle, Measurement range 0-2000μm, resolution up to 0.1μm, with automatic identification of substrate function and Data storage ability, support surface measurement minimum convex 1.5mm.
