Adopt biaxial planetary motion structure, revolution 0-70rpm and rotation 0-80rpm adjustable, equipped with automatic wall scraping device to achieve no dead point mixing, Total Power 6.75kw to meet a variety of material handling needs.
The stainless steel pendulum pipe is used to achieve +/- 180 degree swing, equipped with 25 water spray holes and 1-4 rpm adjustable turntable, supporting 50-100kpa water pressure adjustment, and the test water can be recycled without additional waterproof treatment.
Adopting a planetary two-way swirl/spin structure, the mixing arm runs in reverse with the basket to achieve rapid mixing, with a maximum load of 300g and a speed range of 400-2800rpm. The equilibrate is quiet and can be operated directly in the syringe or test bottle.
The dual-channel interface can connect two Probes at the same time, support K-type -200~ 999.9 ℃ wide range, with low power error-proof system and data locking function, waterproof design to adapt to a variety of environments.
Adopt stainless steel pendulum tube to achieve +/- 180 degree swing, equipped with 25 0.4mm nozzles, flow adjustment range 100-1000L/h, support sample holder 1-4 rpm adjustable speed, test water can be recycled.
With +/- 180 degree swing tube swing and 1~ 4 rpm adjustable sample holder speed, support 50~ 100kpa water spray pressure and 99 hour time setting, and use stainless steel structure to achieve accurate water test.
Adopting a six-axis planetary stirring structure, including two sets of high-speed dispersers and low-speed twist paddles, with a revolution speed of 0-80rpm and a rotation speed of 0-3800rpm, it can achieve no dead-angle mixing, with a Vacuum Level of -0.098MPa, suitable for materials with a viscosity of up to 1 million mPa · s.
Temperature uniformity is improved by fan speed control, the independent air duct circulation system automatically discharges water vapor, the dry culture mode is automatically converted, the temperature control accuracy fosters +/- 0.5 ℃, drying +/- 1 ℃, and the double door structure insulation does not affect the temperature in the box.
Using the principle of planetary motion, the grinding time is only 15-20 minutes, and the discharge particle size is up to 0.1 micron; it supports dry grinding, wet grinding, vacuum grinding and other methods, equipped with four-station design, Rotation speed 800rpm, suitable for various sample characteristics.
The overall structure design, temperature control accuracy +/- 2 ℃, the highest temperature up to 1200 ℃, with over-temperature protection and automatic shutdown function, uniform heating and stable operation.
Adopting the principle of planetary motion, the grinding time only takes 15-20 minutes, the discharge particle size reaches 0.1 micron, supports dry grinding, wet grinding, vacuum grinding and other methods, and is equipped with a 200CFM heat dissipation system and a low center of gravity design to ensure stable operation.
Six-axis planetary stirring structure, equipped with high-speed disperser and low-speed twist paddle, Rotation speed 0-90rpm, dispersion Rotation speed 0-3800rpm, can achieve no dead angle mixing of materials, and has an online temperature measurement system, temperature error less than 1 ℃.
The planetary coaxial coaxial fretting focusing device is used for comfortable and stable focusing; the total magnification is 40X-1600X, and it is equipped with a liftable Abbe condenser and a double-decked mechanical stage to observe unstained specimens clearly.
Using the principle of planetary motion, the grinding time is only 15-20 minutes, the discharge particle size can reach 0.1 micron, support dry grinding, wet grinding and other grinding methods, simple operation and convenient maintenance.
Dual duct forced convection design ensures Temperature Uniformity +/- 2.5%, speed regulating fan supports lightweight Sample Handling, over-lift preventer enhances safety, volume 125L meets diverse needs.
