Irreversible discoloration records the highest temperature, accuracy +/- 1 ° C to +/- 4 ° C, four-speed temperature monitoring range 104-121 ° C, oil-resistant, water-resistant and steam-resistant, instant Response without power supply.
Irreversible Color change for long-term temperature recording; Resistant to oil, water and steam; Temperature accuracy is +/- 1 ° C below 100 ° C and +/- 1.5 ° C from 100 ° C to 154 ° C; Self-adhesive design for easy use and storage.
Suitable for plane or curved surface measurement, not limited by area, easy to operate. Equipped with 0.75mm test head, pressure range can be selected from 0~ 40N, stable performance and easy to carry.
Adopting the principle of irreversible discoloration, the accuracy is +/- 1 ° C below 100 ° C, with 6 temperature grids from 65 ° C to 93 ° C, oil, water and steam resistance to ensure stable operation in harsh environments.
Constant pressure ensures uniform sampling, suitable for a variety of powder material testing, implementation of GB9087-88 and other standards, improve sampling accuracy and conformity.
Manual pressure control pressure holding operation is simple, electronic pressure holding device reduces mechanical abrasion, pressure range 0~ -90kPa, accuracy +/- 0.1kPa, Organic Glass sealing barrel wall thickness 15mm to enhance compressive strength.
Using electric pressure system and circular pressing operation mode, printing pressure 0-4mm, speed 0-100 Meters, adjustable scraper pressure and speed, support low accuracy overprinting and Color detection.
Using R2.5mm steel ball to apply 20N pressure, test at standard temperature for 60 minutes and then evaluate the thermal deformation performance of the material through measurement of Crane diaMeter, which is suitable for testing of various electrical components.
Equipped with 3.5-inch TFT color screen, support 3000 sets of Data storage and interval timing measurement, automatic temperature compensation range 0.0~ 50.0 ℃, dustproof and waterproof grade IP57, Type C charging interface and low power consumption management.
Using electronic Sensor technology, sampling speed up to 960Hz, with 0.5 level Precision and 200 sets of Data storage capabilities, support a variety of test modes and upper and lower limit alarms, suitable for various tensile pressure load tests.
Portable design volume 145 * 52 * 23mm, support 100 sets of data storage and automatic calculation, with upper and lower limit alarm and USB communication functions, relative Indication Error only 0.5%, suitable for a variety of force value unit switching.
Using high elasticity standard rubber and denim for extrusion test, extrusion pressure 10-120kgf adjustable, Test speed 5-30 times/minute, to meet the requirements of YD/1539-2006 standard.
Temperature range 10~ 200 ℃, Temperature Fluctuation +/- 1 ℃, using forced convection design to heat up quickly, over-temperature automatic interruption operation to ensure safety, shelf can be moved for easy cleaning.
Temperature range RT + 10~ 200 ℃ and resolution up to 0.1 ℃, forced convection design to shorten the rapid heating drying time, with over-temperature automatic protection and fan speed regulation function, shelf can be moved for easy cleaning and maintenance.
The pressure column and ball joint structure are used to ensure that the test surface is close, the pressure column mass is 250g, the bottom surface diaMeter is Φ 50 +/- 1mm, and it is equipped with 100g to 500g weight, which can simulate the contact performance of coatings under different pressure conditions.
