Using coaxial cylinder structure with a small number of sample adapters, only 7.8-11 ml sample volume, Measurement accuracy +/- 2%, equipped with dual RS232 interfaces to directly connect printers and computers.
Using coaxial cylinder structure with a small number of sample adapters, the sample volume is only 7.8-11 ml, Measurement accuracy +/- 2%, equipped with dual RS232 interface can be directly connected to the printer and computer for data output.
The planetary coaxial coaxial fretting focusing device is used for comfortable and stable focusing; the total magnification is 40X-1600X, and it is equipped with a liftable Abbe condenser and a double-decked mechanical stage to observe unstained specimens clearly.
The coaxial cylinder structure is used to achieve accurate viscosity measurement. The sample dosage is only 10-20mL. It is equipped with a removable sample Cup for easy replacement and cleaning. It supports a variety of rotor models to cover a wide range of viscosity.
Using 12 stainless steel shaft Rods with a diaMeter of 2-32mm, the 50mm wide test plate can be tested for 180 ° bending. The coating cracking situation is detected by decreasing the diaMeter of the shaft Rod, and the operation is simple and fast.
Using coaxial cylinder structure, the sample volume is only 7-13ml, Measurement accuracy +/- 2%, equipped with RS232 interface to connect printers and computers, suitable for testing a small number of precious samples.
The coaxial cylinder structure is used to achieve accurate viscosity measurement under the specified shear rate, the sample volume is only 10-20mL, and the water Bath jacket can keep the temperature uniform and stable. It supports a variety of rotor models covering a wide measurement range.
Equipped with 8 kinds of diaMeter shaft Rods from 2 to 12mm, the 180 degree bending test can be completed in 1-3 seconds, and the anti-cracking performance of the paint film can be evaluated with the smallest shaft Rod diaMeter, which is easy to operate.
Tapered shaft size Φ 3.1~ 38mm, shaft Rod size 2-32mm, anodic oxidation aluminum and stainless steel material, ergonomic design clamping device, bending arm large knob for easy operation, suitable for measuring plate thickness ≤ 0.8mm.
Equipped with 13 shaft diaMeters from 2 to 32mm, it can accurately determine the cracking performance of coatings; support 1.0mm thickness sample testing, manual operation to ensure smooth and controllable bending process, meeting standard laboratory Environmental requirements.
The bending diaMeter of putty film cracking peeling is tested by bending test plate, and the shaft Rod size is 50mm and 100mm. It is suitable for 0.2-0 mm thick tinplate substrate, and the operation is simple and reliable.
The eccentric spherical shaft structure is used to ensure uniform mixing, and the 2800RPM speed is fixed to achieve fast vortex mixing. The TPU material countertop is wear-resistant and corrosion-resistant, and the Protection Rating reaches IP21, which is suitable for long-term stable operation.
Adopt dual-axis constant force lifting system, lift Travel 200mm, speed range 60-8000rpm, digital direct display Rotation speed, equipped with dispersed impeller and sand grinding disc, adapt to different experimental needs.
The eccentric spherical shaft structure ensures uniform mixing, the fixed Rotation speed is 2800rpm to provide stable oscillation, the TPU material table is resistant to corrosion and wear, supports two operating Modes of pointing and continuous, and the volume is small and the noise is low.
Speed range 60~ 8000rpm, Power 550W, using variable frequency motor to achieve stepless speed regulation, digital direct display Rotation speed, dual-axis constant force lifting system is easy to operate, low noise and no interference.
