Automatic Illuminance Meter

The automatic illuminance meter uses photosensitive components to detect ambient light intensity, converts the optical signal into an electrical signal, and displays it digitally. It is used to measure lighting conditions in areas such as work surfaces and display screens, and to monitor lighting uniformity in printing quality inspections and paper whiteness tests.
Selection
When selecting, ensure the measurement range covers common indoor and outdoor illuminance levels, and the resolution meets testing standards. Consider probes with cosine correction to reduce measurement deviation. Opt for portable models for on-site inspections and fixed models for long-term monitoring. Pay attention to calibration certificates and ensure the protection rating is suitable for the usage environment.

Terms

Instruments

Adopt high-power high-illumination LED Illuminant, Color temperature adjustment range 2300K-8500K, illuminance adjustment range 0-3000LX, no stroboscopic design life of more than 10,000 hours, uniform illumination surface can flexibly adjust the position angle.

$ 5366.00

The uniformity of the transmission surface exceeds 90%, the standard four-speed Color temperature is adjustable, the illuminance adjustment range is 0-120000Lux, and the thickness dimming knob is equipped to achieve precise control. Illuminant has no stroboscopic and the lifespan is more than 10,000 hours.

$ 5237.00

Provide adjustable illuminance and Color temperature visible light, Color temperature range 2300K-8000K, illuminance up to 3000LX, infrared wavelength 850nm optional, radiation intensity greater than 400uW/CM ², stable light color without stroboscopic, life over 10,000 hours.

$ 5850.00

Using high-power LED Illuminant, Color temperature adjustment range 2300K-8500K, illuminance adjustment range 0-3000LX, life of more than 10,000 hours, uniform irradiation without stroboscopic.

$ 7464.00

Transmission surface uniformity of more than 93%, Color temperature adjustment range 2300K-8000K, Illuminance adjustable 0-160,000 Lux, Support Frequency adjustment 1-100KHz, life of more than 10,000 hours, can be connected through RS485 or WIFI computer control.

$ 5366.00

Using 10L Glass Bathtub, small size and less medium consumption, temperature control accuracy of +/- 0.05 ℃, automatic accurate timing and viscosity calculation, support 4 holes at the same time experiment, easy and reliable operation.

$ 1910.00

Controlled by single chip microcomputer, temperature accuracy +/- 0.03 ℃, kinematic viscosity measurement range 0.5~ 20000mm ²/s, automatic tracking of heating Linear dispersion and precise control of water Bath and oil Bath temperature.

$ 2116.00

Vacuum generator to achieve rapid vacuum, accuracy of 1, support 0-9999 seconds holding time automatic control, equipped with imported thickened acrylic sealing barrel, wall thickness 15-20mm, to ensure stable and reliable testing.

$ 756.00

Color temperature adjustment range 2300K-8000K, illumination adjustment 0-1.3 million Lux, Frequency adjustment 1-100KHz, support RS485 to USB and WIFI connection, life up to 10,000 hours or more, to meet a variety of test conditions.

$ 4269.00

Using titanium alloy heating tube and hidden water heating, the heating rate is 0~ 2.0 ℃/min, Temperature uniformity +/- 2 ℃. Ultrasonic atomization tower and circulating fan ensure uniform atomization, support intermittent humidification and automatic water inlet protection.

$ 6205.00

Support Koenig and Persaz double pendulum automatic switching, steel ball diaMeter 5mm and 8mm, with electromagnetic release and electronic counting mechanism to ensure that the test is accurate and not affected by the environment.

$ 11520.00

Using ARM microprocessor and color liquid crystal display, with automatic heating sweep ignition function, Temperature range 40~ 400 ℃, can store 1000 measurement results, support atmospheric pressure correction and forced Air-Cooled.

$ 2116.00

With manual and automatic temperature compensation function, potassium Ion concentration Measurement range 0~ 39 g/L, resolution of 0.01 pK, easy to operate, digital display intuitive, light weight only 1.5kg.

$ 382.00

Microcomputer and anti-interference technology implementation of rapid precision measurement, temperature range -10~ 60 ℃ error +/- 0.5 ℃, humidity range 10~ 95% RH error 2.5% +/- 1%, automatic memory MAX Maximum MIN Minimum and final measurement value.

$ 299.00

Using pneumatic clamping sample, test range 250~ 5600kPa, accuracy +/- 0.5% FS, equipped with silicone oil medium to avoid rusting, automatic shutdown and storage of 50 sets of data, support emergency stop protection and real-time pressure monitoring.

$ 1004.00

Articles