With dual-mode measurement of conductivity and induction, nondestructive detection; Measurement range 0~ 80%, accuracy +/- (0.5% n + 1); Support USB, RS-232 and Bluetooth output, provide digital and LED status dual display.
Measurement range 0.5-3000 μm, maximum resolution 0.1μm, support more than 30 image analysis functions, Particle size distribution and morphology analysis.
The image method is used to analyze the particle morphology and particle size, the test range is 1~ 3500 μ m, the system magnification is 4000 times, the automatic segmentation success rate exceeds 93%, and paraMeters such as length-diaMeter ratio and sphericity can be counted.
100L/min Sampling flow rate and six particle size channel detection, equipped with long life laser Illuminant and imported air pump, support Touchscreen operation and USB data export function.
Using 50L/min Sampling flow rate and six particle size channel synchronous detection, equipped with semiconductor laser Illuminant and Touchscreen control, built-in thermal printer supports real-time data output, Continuous Operating Time up to 5 hours.
Temperature uniformity is improved by fan speed control, the independent air duct circulation system automatically discharges water vapor, the dry culture mode is automatically converted, the temperature control accuracy fosters +/- 0.5 ℃, drying +/- 1 ℃, and the double door structure insulation does not affect the temperature in the box.
Adopting the principle of planetary motion, the grinding time only takes 15-20 minutes, the discharge particle size reaches 0.1 micron, supports dry grinding, wet grinding, vacuum grinding and other methods, and is equipped with a 200CFM heat dissipation system and a low center of gravity design to ensure stable operation.
Processing capacity up to 80L, the minimum particle size of 0.1μm, support dry grinding, wet grinding, vacuum and other grinding methods, combined structure is easy to disassemble and maintain, configuration cooling system to ensure stable operation.
With 8L Processing capacity and 0.1μm discharge particle size, four-station design and 580rpm Rotation speed, support dry grinding, wet grinding and vacuum grinding, equipped with 600CFM cooling system and a variety of ball milling Tank material selection.
Using four-station design, the maximum Processing capacity is 40L, the minimum discharge particle size is 0.1μm. It supports dry grinding, wet grinding, vacuum grinding and other methods, and is equipped with a 200CFM heat dissipation system and a low center of gravity structure to ensure stable operation.
With 12L maximum Processing capacity and four station design, support dry grinding, wet grinding and vacuum grinding in various ways, the minimum discharge particle size is 0.1 μm, using frequency converter and motor drive to ensure grinding conformity and efficient heat dissipation.
Test range 0.5~ 3000μm, Maximum magnification 4000 times, can analyze the number of particles, area, circumference, diaMeter, aspect ratio and other distribution data, support a variety of formats of test report output.
With drying and foster dual mode automatic conversion function, Temperature Fluctuation foster +/- 0.5 ℃, drying +/- 1 ℃, using fan forced convection and autonomous air duct circulation system, improve Temperature uniformity and automatic discharge of water vapor.
With dry grinding and wet grinding dual test function, friction Frequency four-speed adjustable (21/42/85/106cpm), support 0~ 99999 automatic shutdown, in line with JIS-5071-1 and other standard requirements.
With six-channel particle size detection and 2.83L/min Sampling flow rate, using laser Illuminant life of over 30,000 hours, support UCL calculation and Built-in Printer, AC-DC dual-use can work continuously for more than 6 hours.
