Standard Processing capacity range 500-10000ml, suitable for a variety of host models, with a dedicated structural design to ensure Stability and homogenization when processing high viscosity samples.
The equipment operates under vacuum or pressure conditions, with a processing viscosity of 10000MPas, Operating temperature of 170 ° C, equipped with anchor type screw scraping wall stirring slurry and high shear homogeneous Mulser, supporting Multi-ParaMeter measurement such as material temperature and pressure.
Brushless motor to avoid Toner contamination of samples and reduce noise. The processing capacity covers 150 ml to 6 liters, supports a variety of head Modular replacements, and the intelligent Touchscreen can set the program, timing, line speed and torque.
The homogenizing time is up to 3000 seconds, the speed range is 100-10000rpm, and the acceleration is 100-10000rpm/s. It supports multi-stage program control. Vacuum chuck ensures the stability of the substrate and is suitable for assembly line processes.
The speed can reach 30000rpm, the processing capacity is 0.1-1000 ml, the 316L stainless steel dispersion head is corrosion-resistant and high temperature-resistant, and the handheld lightweight design is easy to operate with one hand. It is suitable for rapid shearing and crushing of samples in small containers.
Adopt thyristor high-speed adjustment system, photoelectric speed measurement electronic circuit to ensure reliable Rotation speed, homogenization knife Speed range of 22000rpm, Processing capacity 1000ml, easy to operate and intuitive reading.
Using white water circulation and electric water supply system, equipped with bubble homogenization and manual homogenization dual-use functions, the diaMeter of the extraction cylinder is 200mm, the capacity is 10 liters, and the sealing and clamping device avoids burring leakage.
Support 12 sets of program control, uniform glue time up to 3000 seconds, speed range of 100~ 4000 rpm, equipped with Vacuum chuck system to ensure substrate stability, multi-stage speed and time stepless adjustable, improve coating uniformity and process controllability.
Speed range 13000-34000rpm, Processing capacity 30-800ml, stainless steel working head and PTFE bearing, suitable for liquid homogenization and cell crushing with a viscosity of 5000mPa.s.
Complete 48 Sample Handling within 1 minute, adopt fully enclosed design to avoid cross-contamination, support 0-70Hz homogenization speed and low temperature grinding mode, and the noise is lower than 55dB to ensure a quiet experimental environment.
The equipment adopts international standards, the papermaking diaMeter is 300mm, the capacity is 8 liters, and it is equipped with manual pulp plate and optional vacuum papermaking function.
Adopt 1500W three-phase asynchronous motor, Rotation speed 0-2800rpm adjustable, equipped with a variety of stator head to adapt to different viscosity materials, electric lifting 500mm Travel easy to operate, turn stator gap small shear fineness.
Glass bulb sensitive film, Measurement range 0-14pH, suitable for low Conductivity Detector sample measurement under closed static conditions, Dimension Φ 12 × 120mm.
Electric lifting operation is convenient, digital frequency conversion speed range 0-3000 rpm, Power 7.5KW, 304 stainless steel shaft corrosion resistance, matching 300L vacuum closed Tank and vacuum pump, to achieve dispersion, homogenization, emulsification, crushing, coalescence, suspension, dissolving multi-function.
Set dispersion and stirring functions in one, Speed range 100-8000rpm, manual lift Travel 250mm, suitable for fluid material experiments, high efficiency and easy cleaning.
