Measurement range 0-4mm, contact pressure 100kPa, contact area 2cm ², equipped with digital dial Meter to achieve accurate thickness measurement.
Hollow cylinder center aperture 65mm, maximum tension 600KN, manual pump high voltage 63Mpa, digital pressure Gauge direct reading tension value, compact structure and easy to carry.
Constant pressure ensures uniform sampling, suitable for a variety of powder material testing, implementation of GB9087-88 and other standards, improve sampling accuracy and conformity.
The sealing performance of the test system is less than 10% pressure drop within 1 minute, the resolution is up to 0.1kPa, the maximum Breaking strength value is automatically retained and the trend printing detection results are supported.
Manual pressure control pressure holding operation is simple, electronic pressure holding device reduces mechanical abrasion, pressure range 0~ -90kPa, accuracy +/- 0.1kPa, Organic Glass sealing barrel wall thickness 15mm to enhance compressive strength.
Hollow cylinder center aperture 85mm, maximum working capacity 800KN, piston Travel 150mm, compact structure easy to carry, manual pump with double pressure Operating Mode.
Hand pressure type is easy to operate, the rack and pinion transmission is smooth, the digital display ruler can display the displacement and lock the Travel, the maximum test load is 500N, the measurement Travel is 200mm, and the base is stable and the fuselage is heavy.
Using electric pressure system and circular pressing operation mode, printing pressure 0-4mm, speed 0-100 Meters, adjustable scraper pressure and speed, support low accuracy overprinting and Color detection.
Using R2.5mm steel ball to apply 20N pressure, test at standard temperature for 60 minutes and then evaluate the thermal deformation performance of the material through measurement of Crane diaMeter, which is suitable for testing of various electrical components.
Digital PID Temperature Control system, temperature control accuracy of +/- 0.2 ℃, the upper and lower heat head independent temperature control, double cylinder synchronous circuit to ensure pressure Balance, heat cover heating uniform, support manual and foot pedal dual operation mode.
Using high elasticity standard rubber and denim for extrusion test, extrusion pressure 10-120kgf adjustable, Test speed 5-30 times/minute, to meet the requirements of YD/1539-2006 standard.
The pressure column and ball joint structure are used to ensure that the test surface is close, the pressure column mass is 250g, the bottom surface diaMeter is Φ 50 +/- 1mm, and it is equipped with 100g to 500g weight, which can simulate the contact performance of coatings under different pressure conditions.
Rated thrust 75KN, accuracy +/- 1%, using manual pump loading cylinder and digital pressure Gauge, can record the maximum pressure value, small size, easy to operate.
Maximum pulling force 30kN, hollow self-reset structure, digital pressure Gauge with automatic calculation and peak holding function, manual pump maximum Operating Pressure 63MPa, compact and portable structure.
The pressure-sensitive element is used for automatic counting, the diaMeter of the culture dish supports ≤ Φ 90 mm, and it is equipped with dark deep background and annular fluorescent side-shot lighting. The colony contrast is clear, and the counting is fast and reliable.
