4 groups of samples can be tested at the same time, using PID temperature control accuracy of 0.1 ℃, support segmented program heating, one key automatic calculation of carbon black and ash content, open the lid structure heat dissipation fast.
4 groups of samples can be tested at the same time, using PID precise temperature control technology, Temperature range from room temperature to 1000 ℃, with automatic calculation of carbon black content and ash content function, open lid structure heat dissipation effect is better.
The thermal weight loss method is used to measure carbon black content, the operating temperature can reach 990 ° C, and the 7-inch Touchscreen is equipped to realize one-button calculation, support segmented paraMeter setting, and the Furnace body separation design has better heat dissipation.
Using electrochemistry principle to detect carbon monoxide, with a range of 0~ 1000ppm, with four Alarm modes and wireless data transmission functions, support temperature compensation algorithm and a variety of usage methods.
Using 330 * 230mm carbon steel baseplate and 22 * 985mm stainless steel pole, with aluminum alloy chuck, to achieve stable clamping and flexible height adjustment, suitable for a variety of experimental devices.
Silicon carbon Rod double-sided heating to achieve rapid heating, 70 minutes up to 1300 ° C; closed aluminum silicate Furnace with lightweight thermal insulation bricks to improve thermal efficiency; with over-rise alarm and menu lock function to ensure safe operation.
Using mechatronics design, equipped with High Accuracy S-type Sensor and screw structure, the range is 0~ 10.000KN, the resolution is up to 0.001KN, 500 pieces of data can be stored and 10 segments of fold line correction can be supported.
Using high temperature pyrolysis technology, operating temperature up to 1150 ℃, can test 4 samples at a time, equipped with 7-inch Touchscreen and automatic calculation function, to achieve accurate temperature control and convenient operation.
Range 10kN, accuracy ≤ +/- 1.0% F.S, using mechatronics design, weight only 2.8kg, handle operation labor-saving, can directly display the strength value and have automatic shutdown function.
With manual and automatic temperature compensation function, concentration Measurement range 1 × 10 ^ ²~ 5 × 10 ^ mol/L, the fastest reaction time is less than 4 minutes, support pFe value and iron Ion concentration display.
Electrochemical sensor, detection accuracy +/- 2% F. S, Response Time less than 10 seconds, with automatic Zero tracking and temperature compensation function, explosion-proof design for dangerous places, support a variety of signal output interfaces.
Employing an extrusion production process, the coating thickness is 105 microns, the coating width reaches 300 mm, and the coating accuracy can achieve 0.5 microns, ensuring coating uniformity and high-precision control.
Imported Electrochemical sensor, Response Time less than 10 seconds, detection accuracy +/- 2% F.S., with intrinsically safe circuit design and explosion-proof certification, support for multiple output interfaces and automatic Zero tracking, suitable for harsh industrial environments.
Electrochemical sensor detects 0-1000ppm carbon monoxide, Response Time is less than 60 seconds, through LCD display and buzzer grading alarm, portable design weighs only 115 grams.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
