Using open ceramic core liquid complex design, with solid polymer reference system, Measurement range 0~ 14pH, Temperature range 0~ 80 ℃, Membrane Impedance lower than 250MΩ, to ensure Stability and long life.
With open liquid network design, equipped with solid polymer reference system, Measurement range 0-14pH, Temperature range 0-80 ℃, to ensure long-term Stability and anti-pollution ability.
Using open liquid complex structure, equipped with solid polymer reference electrolysis solution, the membrane resistance is less than 200MΩ, suitable for -5~ 80 ℃ wide temperature environment, to ensure long-term stable measurement.
Open + ceramic core liquid complex design, equipped with solid polymer reference electrolysis solution, membrane Impedance below 250MΩ, Measurement range covering 0~ 14pH, temperature adaptability 0~ 80 ℃, to ensure long-term Stability and Fast Response.
It is designed with an open liquid complex combined with a ceramic core, equipped with a solid polymer reference electrolysis solution, and the membrane Impedance is less than 250MΩ. It has long life characteristics and a wide temperature range of 0-80 ° C.
It adopts the combination design of open liquid network part and ceramic core, equipped with solid polymer reference electrolysis solution, the membrane Impedance is lower than 250MΩ, and the shell is made of titanium alloy, which is suitable for 0-80 ℃ temperature environment.
Imported special steel pressure needle, Hardness and long life, range 0-20HW, can directly read the Hardness value, suitable for on-site rapid testing, Stability and portability.
Impact energy 11mJ, Impact device mass 50g, ball head diaMeter 3mm, Hardness measurement hole or cylinder, suitable for a variety of metal hardness of materials testing.
It adopts 45 ° fixed angle design, loads 1000g +/- 10g, and evaluates Hardness by scratching coatings with different Hardness pencils, which is easy to operate and accurate.
Compact and lightweight can be operated with one hand, without support and testing experience, the test range is equivalent to brinell hardness 25~ 150HB, can measure a variety of Hardness scales and has MAX Maximum hold and average calculation functions.
Adopt four-link mechanism to ensure a constant 45 ° test angle, equipped with 500/750/1000g adjustable load, accurately determine film Hardness through different Hardness pencil scratches, meeting standard test Environmental requirements.
The 45 ° fixed angle design is adopted to ensure that the cylindrical pencil lead maintains a constant angle and pressure, the load is 500g, the error is +/- 10g, and the coating Hardness level is determined by the minimum Hardness value pencil trace.
Adopt 45 ° test angle and adjustable load system, the test platform traverse speed 0.5-10 mm/s adjustable, equipped with LCD display real-time monitoring, to meet the needs of accurate coating Hardness detection.
Compact size is only 130 * 76 * 32mm, supports 9 kinds of hardness of materials measurement, can store 50 sets of data and realize six kinds of Hardness standard conversion, equipped with RS232 interface for data communication.
The pencil scratch method is used to test film Hardness, and the three-point contact design always guarantees a 45 ° angle, which meets the GB6379 standard and is suitable for film Hardness detection in laboratories and construction sites.
