High dispersion efficiency and no need to clean, Rotation speed of crankshaft 660rpm, up and down amplitude 16mm, shock-absorbing spring design, clamping a variety of containers, easy to operate.
The equipment has high dispersion efficiency and no need to clean, the crankshaft Rotation speed is 660rpm, the upper and lower amplitude is 16mm, the clamping capacity is 2L, and the Floor-Standing structure is equipped with shock absorber springs, which is stable and convenient to operate.
High dispersion efficiency and no need to clean, Crankshaft Rotation speed 660rpm, up and down amplitude 16mm, vertical structure equipped with shock absorber spring, support bottle and can two Operating Mode.
Explosion-proof design, suitable for flammable and explosive environment; with variable speed stirring function, can quickly and accurately disperse material particles to meet the grinding process requirements of paints, inks and other industries.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
With 660rpm Rotation speed and 16mm up and down amplitude, high dispersion efficiency and no need to clean, support for clamping a variety of containers, Floor-Standing design with shock spring.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
Rotation speed up to 3000rpm, line speed up to 33m/s, electric lifting design for easy operation, double-end seal to ensure vacuum sealing, suitable for viscosity ≤ 25000cps material efficient dispersion mixing.
Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
Equipped with 7-inch Touchscreen, easy to operate, supports 0.5~ 6 million mPa · s wide range measurement, can display rheological Linear dispersion and realize automatic conversion of power and kinematic viscosity, with Gigabit network port and U disk storage function.
Using electric lifting structure, low failure rate and easy to move; 0-3000rpm wide range speed regulation, with 80/100mm dispersion disc, can handle viscosity ≤ 25000cps material, to achieve efficient dispersion mixing.
Equipped with 7-inch Touchscreen and rheological Linear dispersion display function, support 0.1-200 rpm stepless speed regulation and +/- 1% Measurement accuracy, built-in temperature sensor for automatic viscosity conversion and fast data transmission.
Equipped with 7-inch Touchscreen, easy to operate, support 0.1-200 rpm stepless speed regulation and rheological Linear dispersion display, Measurement accuracy of +/- 1% F. S, with Gigabit network port and U disk storage function.
