Adopt double grinding head linear friction mode, load 570 +/- 20g adjustable, working plate Rotation speed 0~ 135rpm, magnetic chuck design makes sample loading and unloading convenient, the counter directly reads the number of sanding.
The equipment is driven by a servo motor, with an adjustable clamping speed of 5-50mm/min, a maximum allowable specimen height of 2.2 Meters, and four splint Sensors and LCD screens to achieve automatic shutdown and safety protection.
The steel stylus is used for precision drawing, the diaMeter range is 0-10.5 mm, and it is equipped with multiple sets of weights to achieve accurate loading.
Rated thrust 75KN, accuracy +/- 1%, using manual pump loading cylinder and digital pressure Gauge, can record the maximum pressure value, small size, easy to operate.
Easy to use magnetic suction Cup loading and unloading, sanding times 0~ 9999 two-way count, friction load 570 +/- 20g, additional weight adjustment load, suitable for undercoating and putty anti-sanding performance test.
Adopt worm gear mechanical loading system, equipped with intelligent digital pressure display, range up to 3KN, maximum Travel 30mm, support on-site nondestructive detection, easy operation and high test Precision.
Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.
The series micro motor is used to provide 94N.cm Max. Torque, which supports 100-1300rpm stepless speed regulation; the multi-stage Non-metallic gear transmission realizes force enhancement and noise reduction, and the special rolling head design is convenient for Impeller loading and unloading, suitable for a variety of specifications containers.
Using series micro motor and multi-stage Non-metallic gear transmission, torque up to 94N.cm, Speed range 100-1300rpm stepless adjustable, equipped with special rolling head easy loading and unloading, open frame suitable for a variety of containers.
It adopts a high-precision stepper motor and ball screw transmission to ensure smooth and accurate loading. It features a wide range of loading speeds and force measurement capabilities, with high precision in measuring and controlling load, deformation, and displacement.
DC brushless motor design, Rotation speed 0~ 2000rpm, put in the stirrer without hopper; double-decked thermal insulation structure, rapid heating and prolong the life of the host; built-in over-temperature protection device, safe and reliable use.
The series micro motor is used to ensure safe and reliable operation, the multi-stage Non-metallic gear transmission realizes 94N.cm torque output, the stepless speed regulation range is 100-1300rpm to adapt to different viscosity media, and the special rolling head design is convenient for Impeller loading and unloading.
Can test flowability, Angle of Peace and Loose Bulk Density, equipped with 30ml stainless steel measuringflask and double powder plate, funnel diaMeter can be selected 5mm or 2.5mm, for precise control of powder mass.
Dial indicator reading is accurate, with dual unit display without conversion, maximum Measured value 100N, Indication Error +/- 1%, can freely switch peak holding and real-time load value, suitable for all kinds of fixture installation.
Using three-phase brushless DC motor to achieve 50-1500rpm stable speed regulation, temperature control accuracy +/- 1 ℃ and with temperature protection function, soft start design to prevent stirrer beating, suitable for long-term unmanned operation.
