Contains RS232 data cable and software CD-ROM, which can be connected to a PC for data management operations. It is suitable for all Coating thickness Gauges except CM8829 series.
Using electric heating to directly generate high voltage steam, the highest Operating temperature 135 ℃ and accuracy of 0.1 degrees, with time temperature level control and automatic pressure chill down, 3 minutes after cooking items can be reduced to 20-40 ℃.
Equipped with 7-inch TFT display, supports 5 measuring methods such as direct reading method and known addition method, Measurement range 1 × 10-6~ 0.1M, accuracy +/- 1% F.S., automatic identification of ion selective ElectRode, can store 1000 sets of data.
Measurement accuracy of +/- 1% F. S with 5 point button calibrating and automatic end point locking, support for multiple concentration Unit switches, built-in 500 data storage and GLP compliance.
With 1% F. S Measurement accuracy and automatic temperature compensation function, support 2-5 point calibrating and 500 sets of Data storage, equipped with large screen backlight display and automatic ElectRode diagnosis.
Support conductivity 0-200mS/cm and dissolved oxygen 0-20mg/L measurement, with automatic temperature compensation, ElectRode diagnostic function and IP54 Protection Rating, Data storage up to 450 groups and support Bluetooth printout.
ElectRode filling solution design, suitable for ammonia Gas sensing electRode maintenance, capacity 480mL, provide stable ion strength adjustment, ensure Measurement accuracy and ElectRode life.
Measurement range of 0.000001~ 0.1mol/L and +/- 0.5% F. S accuracy, 5 point calibrating, manual temperature compensation and automatic end point locking.
With conductivity 0-2000mS/cm and dissolved oxygen 0-20mg/L wide range measurement, support automatic temperature compensation and air pressure compensation, 3.5 inch color screen display, data storage capacity of 3000 groups, Protection Rating is IP57.
General ion standard solution with a concentration of 1000ppm, using PTFE solution bottle Encasement, capacity 480mL, suitable for daily ion calibrating needs.
Range up to 1 million cd/m ², 10mm and 20mm replaceable Probe, support instantaneous measurement, simultaneous display of real-time luminance values, MAX Maximum, MIN Minimum and Average, and stroboscopic measurement and Spectral Curve analysis.
Equipped with 7-inch touch color screen, support conductivity 0-2000mS/cm and dissolved oxygen 0-20mg/L measurement, with automatic temperature and pressure compensation, 1000 sets of Data storage and IP54 Protection Rating, intelligent and convenient operation.
With 0.2 ° observation angle and -4 ° incident angle configuration, Measurement range 0~ 3000cd · lx-1 · m-2, support voice broadcast and Touchscreen operation, built-in Data storage card for easy export.
ABS + PC shell is sturdy and durable, equipped with 2.0 inch 320 * 240 resolution display screen, supports methane, O2, H2S, CO four Gas detection, Response Time is the fastest 20 seconds, battery life is 8 hours, with sound and light vibration triple Alarm mode.
15 minutes to quickly heat up to the set temperature, temperature control accuracy of +/- 0.5 ℃, using multi-point calibrated to eliminate temperature errors, standard imported Glass digestion tube resistant to sudden cooling and sudden heating without bursting.
