The split structure is equipped with a dedicated thick coating Probe, Measurement range of 0~ 13000 μm, accuracy +/- 3%, IP65 Protection Rating and high-speed measurement capability of more than 60 readings per minute.
Using eddy Current thickness measurement principle, equipped with ultra-thick coating special Probe, Measurement range 0~ 13000 μm, error +/- 3%, can read more than 180 data per minute, support 250,000 Measured value storage.
Wire-wound design can be prepared 160 micron wet film thickness, corrosion resistant stainless steel material, suitable for high viscosity test and not easy to block, longer service life.
The wire-wound structure enables coating with a 171.5-micron thick film, while the stainless steel material ensures corrosion resistance and long-term durability. The 9.52mm diaMeter Rod body, combined with 1.91mm steel wire, ensures operational stability.
Wire-wound design to achieve 171.5 micron wet film thickness, stainless steel corrosion resistance and not easy to break wire, application width 300mm to ensure uniform coating, suitable for thick film preparatory needs.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Measurement range of 50~ 7600 μm, error +/- 3%, suitable for thick soft coatings such as polyurea and asphalt neoprene, providing accurate thickness detection.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Measurement thickness up to 25mm with an error of only +/- 3% with removable FJS Probe for thick protective coating substrates, statistical capabilities and 250,000 Data storage capabilities.
Featuring a seamless winding process with 0.08mm fine steel wire, a wet film thickness of 6.9μm, suitable for coating various fluids, and a diaMeter of 9.52mm ensures stable coating performance.
Measurement thicknesses up to 25mm with an error of only +/- 3% and a removable FJS Probe for thick protective coating measurements, supporting 1000 Data storage and statistical functions.
The formed pRoduction process ensures uniform film, wet film thickness of 110μm, total length 250mm with 250mm application width, 304 stainless steel material provides durability and accurate Spreader effect.
Wire-wound structure design, wet film thickness 160 microns, suitable for high viscosity test is not easy to block, 303 stainless steel material corrosion resistance, longer service life.
Spreader formed process to ensure uniform, wet film thickness of 80 microns, diaMeter 10mm design and stable operation, 304 stainless steel material durable and unbroken wire, easy cleaning and maintenance.
Using the formed pRoduction process, the wet film thickness is 6 microns, the accuracy is 0.5 microns, the cleaning is convenient and there is no worry of broken wire, to ensure the precision and durability of the coating prepative.
