Contains 1026 standard Colors, conforming to the National Standard for Architectural Color Representation Methods, displaying 6 color samples per page, suitable for architectural color selection and management.
The axial flow fan is used to supply air and support stepless speed regulation of 0~ 3m/s, and the anemoMeter has a range of 0~ 10m/s, which is suitable for the determination of the initial drying anti-cracking performance of laminated architectural coatings.
The fan-shaped matte design contains 1188 standard colors, conforms to the national standard GB/T15608-2006, and provides a complete water-based paints formula system and colorants formula table. The colors are divided into seven series.
The device places the test plate in parallel in the wind tunnel, the wind speed control accuracy is 3 +/- 0.3m/s, the drying time is automatically controlled, and the surface crazing can be visually inspected, which is suitable for the evaluation of coating anti-crack performance.
The device provides 3 +/- 0.3m/s wind speed through axial flow fan in wind tunnel, Timer delay range of 0.01 seconds to 99 hours 99 minutes, can automatically control drying time and eye test plate surface crazing, support parallel test.
With 450 +/- 2g brush weight and 300mm scrubbing Travel, scrubbing speed 37 +/- 2cpm, can accurately test the anti-scrubbing performance of coatings, suitable for interior and exterior wall coating inspection.
Using axial flow fan and test wind tunnel structure, the wind speed can be adjusted in the range of 3 +/- 0.3m/s, equipped with Timer delay range of 0.01 seconds to 99 hours and 99 minutes, automatic detection of material surface crazing.
Measurement range covering 55~ 140KU, suitable for accurate viscosity analysis of various coating samples.
Smooth matte surface does not contain plasticizer, reflectance < 4%, thickness 0.25 +/- 0.02mm, to ensure test data Repeatability and comparability, in line with national standards.
Scruf Travel 300mm, speed 37cpm, total weight of brush and brush holder 450g, suitable for architectural coatings coating scrub resistance testing, in line with national standards.
Contains 240 kinds of matte colors for interior and exterior walls, mainly ferric oxide exterior Color, providing a complete water-based paints formula, size 150mm * 50mm * 15mm, a total of 60 pages, 4 color blocks per page, easy to configure and control.
The wind speed is controlled in the range of 3 +/- 0.3m/s, equipped with axial flow fan and automatic timing function, which can simulate the drying process under specified conditions and effectively detect the surface crazing of the material.
Using stain removal rate evaluation method, scruf speed 37cpm, load 1000g, can accurately adjust the liquid Flow rate, by measuring the reflection coefficient changes to evaluate the stain resistance of coatings.
Utilizing a full-spectrum LED light source and a spectral sensor with a wavelength range of 400-700nm, it is equipped with a 3.5-inch capacitive touch screen, built-in multiple color cards, achieving a color card matching accuracy of over 90%, and capable of measuring various color parameters.
CHNSPEC CR30 uses 45 °/0 measurement structure, supports RGB, Lab and other Color space measurement, equipped with IPS full color screen, Measurement accuracy of 0.01.
