Using industrial grade Sensor to detect nitrogen dioxide gas, range 0~ 20ppm, resolution 0.1ppm, Response Time T90 < 60s, with waterproof, dustproof and explosion-proof characteristics, small and durable.
MCU chip to achieve low power consumption operation, equipped with intelligent Sensor to ensure +/- 3% detection accuracy and 30 seconds fast Response, with explosion-proof structure and a variety of signal output interfaces, support wireless transmission and remote control operation.
Electrochemical sensor, ethylene oxide detection range 0-100ppm, resolution up to 0.1ppm, Response Time less than 60 seconds, with IP65 waterproof rating and vibration alarm function, suitable for harsh environments.
Electrochemical sensor, Response Time less than 30 seconds, Measurement range 0-100ppm, 4-20mA signal output and explosion-proof structure, suitable for gas monitoring in harsh industrial environments.
With explosion-proof structure design, Response Time is less than 30 seconds, resolution is up to 0.1ppm, with 4-20mA and RS485 signal output, suitable for gas monitoring needs of various industrial environments.
Using Industrial Sensor, Response Time is less than 30 seconds, accuracy +/- 3% FS, with explosion-proof structure, support for a variety of Gas detection and double alarm point setting function.
Measurement range pN value of 0.00~ 8.00, ammonia nitrogen concentration of 0.05~ 1000mg/L, with automatic mixing and thermostatic system, anti-sample Color, metal ions and turbidity interference, support a variety of reading methods.
Pump suction sampling, Response Time T90 ≤ 20 seconds, detection accuracy ≤ +/- 3%, built-in 4000mAh large capacity battery, support Data storage and Temperature Humidity detection, Protection Rating IP65.
32-Bit microprocessor and 24-bit ADC chip, equipped with 2.4-inch high definition screen, support 1-6 Sensors and a variety of output modes, with automatic recovery and anti-corrosion function, Response Time T90 ≤ 20s, resolution 0.01ppm.
Using imported gas Sensor and microcontroller technology, Response Time T90 ≤ 20s, detection accuracy ≤ +/- 3%, dustproof design with dust Filter, suitable for harsh occasions.
The highest temperature is 1400 ℃, the Furnace volume is 4.5L, and the aluminum oxide fiber Furnace and silicon carbon Rod heating elements are used to support the inert gas environment and ensure the uniform and stable sintering of the material.
Electrochemical sensor, detection range 0~ 250ppm, resolution 1ppm, with sound, light, vibration triple Alarm mode, IP65 Protection Rating, support Data storage and flashlight function.
Maximum temperature up to 1700 ℃, Furnace volume 36L, using aluminum oxide fiber material and silicon molybdenum Rod heating element, equipped with a chill down system to ensure sealing performance, support inert or reducing gas environment sintering.
Equipped with 2.4-inch IPS high definition screen and 32-bit processor, support 1-6 Sensor expansion, with 4-20mA output and RS485 communication, Protection Rating IP65, Response Time ≤ 20 seconds, accuracy ≤ +/- 3%.
Imported Electrochemical sensor, Response Time less than 10 seconds, accuracy of +/- 2% F.S., with explosion-proof design and a variety of output interfaces, support remote monitoring and Automatic calibration, suitable for hazardous environments.
