The speed can reach 30000rpm, the processing capacity is 0.1-1000 ml, the 316L stainless steel dispersion head is corrosion-resistant and high temperature-resistant, and the handheld lightweight design is easy to operate with one hand. It is suitable for rapid shearing and crushing of samples in small containers.
The rotating speed can reach 30000rpm, the processing capacity is 1-250ml, the handheld lightweight design is suitable for a small amount of samples in a small container, and the corrosion-resistant stainless steel dispersion head is used for easy disassembly and cleaning. Double insulation protection ensures safety.
With a speed of up to 30000rpm and a processing viscosity of 10000mPas, the claw-type high-shear structure and interchangeable stator and rotor provide triple safety protection and continuous 6-speed regulation, ensuring efficient dispersion and durability.
Speed up to 30000rpm, the maximum processing viscosity of 10000mPa.s, the use of claw high shear head structure and triple safety protection, can quickly homogenize tissue samples, stator and rotor interchangeable cost savings.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
Measurement range 58~ 92% Brix, minimum reading 0.002, scale reading mode, compact shape only 155mm long, Net weight 160g for handheld operation, suitable for a variety of liquid concentration detection.
Rotation speed 5000~ 30000rpm, Processing capacity 0.2~ 80ml, handheld operation is light and convenient, suitable for outdoor or laboratory mobile use, providing High Accuracy stainless steel cutter head.
Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
High-performance motor running smooth and low noise, with CPU digital display dynamic Rotation speed control, can realize timing fixed speed operation, Processing capacity 10-100L, lifting Travel 600mm, support a variety of mixing forms simple replacement.
Handheld, lightweight and portable, large-capacity battery supports outdoor mobile operation, Rotation speed 5000-30000rpm, Processing capacity 0.2-150 ml, stainless steel material corrosion resistance, double insulation protection is safe and reliable.
The adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel ≥ 80mm. The integrity of the paint film was evaluated by seven grades, and the operation was simple and conformed to the GB/T1720 standard.
Using photo paper smooth surface combination technology, observing the imprint after applying a uniform load, the pressure range of the probe is 50-250N, and the diaMeter of the rubber probe is Φ 40mm, which can accurately evaluate the chalking grade of the paint film.
