Adopt pressure converter induction, capacity 50kg/cm ², oil feeding speed 175 +/- 5mL/min (Cardboard), automatically complete the pressurization and decompression operation, and automatically retain and print out the test results.
Adapted diaMeter 16mm formed Metering Rod, the total length of 2000mm, through the special structure to correct the straightness of the Rod body, to ensure stable rotation and full contact with the substrate, improve the thickness control accuracy of Spreader.
Can measure the dynamic viscosity of normal temperature solid high temperature molten fluid, viscosity range 10~ 200000mPa · s, Temperature range RT +~ 250 ℃, repRoducibility +/- 0.5% F. S, support a variety of Rotor speed and timing functions.
Adopt swirl/spin friction surface contact method, equipped with 1 pair of abrasive wheels, working disc Rotation speed 60/72rpm, load range 250-1000g, support LCD counting, in line with many international standards.
With three independent test stations, the load range is 50~ 1000g, and Travel 10~ 60mm is adjustable. Support a variety of friction modes such as alcohol cotton cloth, eraser and pencil Hardness, and the test paraMeters can be preset with power-off memory function.
Using 100LPI line number and quadrilateral pyramid hole structure, the transfer uniformity of inks is precisely regulated through hole shape and line number, which affects the wet film thickness and ensures the stability of ink supply.
Rotation speed is accurate and stable with high subdivision stepper motor. Measurement accuracy is +/- 1% F.S. The embedded integral heating design makes the heating uniform and the thermal inertia is small, and supports the whole process monitoring of viscosity-temperature Linear dispersion changes.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Using stopwatch counting method, the length of the swing Rod is 500 +/- 1mm, and the total mass of the swing is 120 +/- 1g. The resistance to deformation is evaluated by measuring the ratio of the swing amplitude time on the film to the swing time on the Glass.
Measurement range 0~ 1500μm, accuracy +/- (5μm + 5%), stylus end angle of 60 degrees, suitable for surface profile measurement, with line design for easy connection.
Wet film thickness 45μm, main Rod diaMeter 10mm, effective application width 600mm, using SUS304 material, Coating Weight, length and surface preparation can be customized, suitable for a variety of Spreader conditions.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Equipped with 1 tie Rod and 10 adapters, the specifications cover M6 to M24, and are suitable for a variety of bolt sizes to ensure test compatibility and ease of operation.
Adopting quadrilateral pyramid mesh structure, line number 300LPI, print width 70mm, chrome plating on the surface to enhance Abrasion Resistance and block solvent corrosion, electronic engraving technology to ensure accuracy.
Waterproof design can be used in humid environments, dual-line display displays the current value and extreme value at the same time, low-power error-proof system avoids wrong readings, temperature range -50.0~ 150.0 ℃, accuracy +/- 0.4 ℃.
