Using wire-wound stainless steel wire structure, the film thickness is 100 microns, the total length is 375mm, and the application width is 255mm to ensure that the Spreader is uniform and firm, suitable for precision experimental operation.
Wire-wound design wet film thickness 11.4μm, wire diaMeter Φ 0.13mm, not easy to block and easy to clean, suitable for a variety of substrates, to achieve uniform Spreader and flexible thickness adjustment.
Wire-wound design wet film thickness 9.1 μ m, steel wire diaMeter Φ 0.10mm, chrome-plated surface is easy to clean and prolong life, suitable for a variety of substrates, Spreader uniform and flexible.
Suitable for diaMeter 0.1 to 4mm wire, Measurement range 0.03-50 microns, resolution 0.01 microns, equipped with thermal printer and quick installation fixed table, easy and accurate operation.
With 10-60 times/min adjustable speed rate and 10 ° -360 ° adjustable angle, supports 6-station synchronous testing, simulates the bending tensile stress of the wire through reciprocating rocking, and evaluates durability.
Support 2-wire method and 3-wire method measurement, Ground Voltage Measurement range 0~ 200V, Ground Resistance Measurement range 0~ 199.9 Ω, Response Time about 5 seconds, with continuous measurement function and overload protection, suitable for a variety of grounding system testing.
Maximum load 5KN, suitable for wire tensile testing, strong clamping and accurate measurement, to meet a variety of material testing needs.
Maximum load 5KN, suitable for tensile testing of wire materials, with precise clamping function to ensure accurate and reliable test data.
Wire-wound design, wet film thickness of 102.9μm, wire diaMeter Φ 1.14mm, effective application width 1500mm, not easy to block and easy to clean, suitable for high viscosity coatings.
Adopt lever equilibrate principle to precisely control pressure, Test Travel 6-150mm adjustable, speed 1-100 reciprocating/min stepless adjustable, double station design to improve test efficiency, support a variety of friction head replacement to meet different standard requirements.
A wet film of 148.6 μm can be prepared using a wire-wound process with a 1.65 mm wire diaMeter, ensuring accurate and durable coating while preventing wire breakage issues.
Using 0.06mm ultra-fine stainless steel wire, the wire diaMeter is thinner than the common 0.07mm in the market, the bristles are soft and can be deeply cleaned without damaging the roller surface, suitable for fine cleaning applications.
Wire-wound process is prepared with 6.9 μm wet-film, and the diaMeter of the steel wire is only 0.08mm. If the hair is thin, seamless winding reduces the risk of broken wire, and is suitable for a variety of fluid Spreader applications.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Using reciprocating wire friction method, Needle Frequency 55 +/- 5 cycles/minute, displacement 20 +/- 1mm, with automatic shutdown function, when the scraper needle wears through the insulating layer and contacts the conductor, the equipment automatically stops.
