Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
Using clip design to ensure good contact with the surface, Teflon wire is flexible, durable and easy to clean, can withstand up to 300 ℃ high temperature, lightweight structure to avoid affecting the Measuring temperature.
The open contact design ensures that the Probe is in good contact with the surface, and the Teflon wire combines flexibility and easy cleaning characteristics to withstand high temperatures up to 300 ° C, and the lightweight shape avoids temperature interference.
The clamping design ensures close contact with the surface of the workpiece, Teflon wires are easy to clean and flexible and durable, the maximum Operating temperature is 300 ° C, and the lightweight structure avoids measurement interference.
The magnetic adsorption design is easy to fix on the surface of the workpiece, the Teflon wire is easy to clean and flexible and durable, the maximum temperature resistance is 300 ° C. Sensor and magnet insulation ensure measurement accuracy, suitable for round workpieces such as metal tubes and body.
The clamping design ensures good contact with the workpiece surface, the lightweight shape avoids affecting the temperature, the Teflon sheath is flexible and durable, with a maximum temperature resistance of 300 ° C, and the ceramic insulation guarantees accurate readings.
Clip design ensures good contact with the workpiece surface, Teflon wire is flexible, durable and easy to clean, with a maximum temperature resistance of 300 ° C, lightweight shape to avoid affecting measurement accuracy, suitable for various shapes of objects.
The equipment supports 0.5-20 liters of barrel paint mixing, revolution speed 100-200rpm, rotation speed 200-400rpm, using multi-stage intelligent frequency conversion speed regulation and door opening and shutdown protection to achieve smooth operation and safe operation.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
The adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel ≥ 80mm. The integrity of the paint film was evaluated by seven grades, and the operation was simple and conformed to the GB/T1720 standard.
Using photo paper smooth surface combination technology, observing the imprint after applying a uniform load, the pressure range of the probe is 50-250N, and the diaMeter of the rubber probe is Φ 40mm, which can accurately evaluate the chalking grade of the paint film.
32 5ml centrifuge tubes can be installed vertically on both sides, using a vertical installation design, suitable for HT-X100 swirl/spin Mixer, improving Sample Handling efficiency.
