The digital display temperature control is accurate and reliable, the hot air circulation system is composed of a high temperature fan and a suitable air duct to improve the Temperature uniformity in the working room, and the heating wire is installed at the bottom to heat up quickly.
Tack is good and non-degumming, adhesion reaches 7.6 N/cm, mass performance is stable, suitable for cross-cut adhesion testing, to ensure accurate film integrity assessment.
Adopting the test principle of inclined rolling ball method, the tilt angle adjustment range is 0~ 40 °, equipped with 32 GCr15 bearing steel balls, and the shape tolerance accuracy exceeds GB/T308 level 40 to achieve accurate initial Tack evaluation.
Humidity environment can be simulated according to the national standard design, with 500g measuring device and 1cm ² flat bottom area, easy to operate and accurate results.
With a 5/10 station design and room temperature range, multiple samples can be tested simultaneously, and the adhesion and durability performance can be accurately evaluated through the suspension weight measurement of the displacement or complete disengagement time.
Application width 300mm, Spreader accuracy +/- 0.005mm, Drawdown blade can be quickly disassembled and cleaned, three independent temperature control oven to ensure uniform drying, suitable for a variety of substrates and Stock processing.
Ceramic fiber liner and door seal, high temperature and easy to clean; equipped with P.I.D fuzzy logic controller, Temperature Fluctuation +/- 0.5 ℃, support 7 groups of 63 steps programmable operation, circulating fan Rotation speed adjustable to ensure accurate and safe experiments.
The maximum effective temperature is 600 degrees Celsius, which is better than conventional 500-degree equipment; it is equipped with an independent temperature limiter to set the upper temperature limit and double protect high-value materials; the liner is made of thickened 304 stainless steel, which is resistant to high temperature and corrosion.
Ceramic fiber material, high temperature performance, temperature control accuracy of +/- 0.5 ℃, programmable multi-stage control, support 63 steps Program settings, easy to automate complex experiments.
Temperature range Rt + 10~ 200 ℃, Temperature Fluctuation +/- 1 ℃, Equipped with Forced Circulation Convection Channel and High Accuracy Platinum Resistance Sensor to ensure a stable high temperature environment, suitable for Sampling Handling and catalyst activation.
The equipment tests the initial Tack by short contact between steel ball and adhesive tape sample at a small pressure, adjustable tilt angle 0~ 60 °, rolling ball range 1/32 inch to 1 inch, suitable for a variety of material adhesion evaluation.
With 5 groups of independent testing capabilities, the temperature control range is from room temperature to 70 ° C, and the hot air circulation method is used to ensure Temperature uniformity.
Temperature range up to 500 ℃ and Fluctuation only +/- 1 ℃, equipped with hot air circulation system to ensure Temperature uniformity, support independent temperature limit alarm and RS485 Communication interface to meet the precise temperature control requirements in high temperature environment.
The maximum effective temperature is 600 ° C, which is better than the conventional 500 ° C equipment; it adopts thickened 304 stainless steel liner, which does not deform at high temperature and prevents acid and alkali corrosion; it is equipped with an independent temperature limiter to provide double temperature protection to ensure material safety.
Adopting high-temperature non-alkali fiberglass insulation layer sealing resistance wire, the heating area is large and the temperature rises quickly, the maximum operating temperature is 380 ° C and supports continuous work, and the hemispherical design is not easy to bruise Glass ware.
