Winding speed 1-20R/min adjustable, free tension 25N-250N stepless adjustment, support 2-5mm diaMeter wire test, maximum output torque 40N.m, to meet the needs of different wire diaMeter detection.
The equipment adopts dual-station synchronous unwinding and thermostatic hot pressing technology, the bonding speed is adjustable from 2-10m/min, the hot pressing temperature is room temperature to 200 ° C, the line pressure is 5-50N/mm, and it is equipped with automatic deviation correction and full closed-loop tension control to ensure the material alignment accuracy and stable winding.
Maximum Spreader width up to 1000mm, Spreader speed 1-10m/min adjustable, support unlimited length Spreader and automatic winding, forward and reverse stepless speed change, discharge and receiving reel tension adjustable, heating Rod and glue slot can be quickly disassembled to clean up residual glue.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
The equipment supports 400mm maximum Spreader width, Spreader thickness 0.01-2 mm adjustable, with forward and reverse stepless speed change and automatic winding function. The rubber groove and upper rubber wheel can be quickly disassembled and cleaned to adapt to different material tension control needs.
It can test the cracking of the paint film after bending 180 degrees in 1-3 seconds, and the diaMeter range of the shaft Rod is 2-32mm. It is suitable for the test plate with a thickness of not more than 1.0mm. Quick evaluation of flexibility.
The bending diaMeter of putty film cracking peeling is tested by bending test plate, and the shaft Rod size is 50mm and 100mm. It is suitable for 0.2-0 mm thick tinplate substrate, and the operation is simple and reliable.
Equipped with 8 kinds of diaMeter shaft Rods from 2 to 12mm, the 180 degree bending test can be completed in 1-3 seconds, and the anti-cracking performance of the paint film can be evaluated with the smallest shaft Rod diaMeter, which is easy to operate.
Rotation speed control is accurate and synchronization performance is good; the height of the casting roller can be adjusted to adapt to different solution strength materials; the surface finish of the hard chrome-plated mirror roller is high, and it is equipped with a circulating water chilling down system. Temperature control accuracy +/- 1 ℃.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
The photoelectric counter is used to realize automatic counting, and the measurement is fast and accurate; the period of M-3 swing Rod is 0.625s, and the swing time on standard Glass is 440 +/- 6s; the horizontal mechanism is improved, and the scale can be moved horizontally to facilitate zero adjustment.
Using wire-wound design, uniform groove is formed by precision winding stainless steel wire, wet film thickness control accuracy reaches 4 μm, application width 220mm, to ensure uniform coating and repeability.
The tapered shaft size range is 3.2~ 38mm, and the shaft length is 203mm, which can test the cracking and disbonding performance of the paint film under bending conditions, in line with international standards.
It can prepare a wet film thickness of 13.7 microns, with a wire-wound design providing stable coating performance. The 9.52 mm diaMeter ensures easy operation, making it suitable for various paint application scenarios.
Equipped with 2 to 12mm eight diaMeter stainless steel cylindrical mandrel, in the form of hinged bending, in line with GB6742 standard, suitable for Coating bending performance testing.
