Hydraulic automatic pull-off test, the pull-off speed is stable and controllable, the accuracy is +/- 1% full scale, equipped with pull-off kit size 10-50mm, built-in rechargeable battery and 200,000 Data storage.
With 0.5 accuracy class and 1000N range, support force holding time 0-999.9 seconds can be set, integrated pull-off stop and overload protection functions, easy and reliable operation.
Using pneumatic adhesive sample pressing and automatic release, the test range is 0-1000J/M ², the accuracy is 0.001J/M ², the Z-direction failure energy is measured by pendulum Impact measurement, and the structural rigidity is strong to reduce energy loss.
Portable design built-in lithium battery, 0-3000p range accuracy +/- 1%, equipped with 10-50mm pull-off spindle, automatic calculation of pull-off force without conversion table, aluminum alignment unit to ensure uniform testing.
Adopt precision automatic control data collection system, range 3000N, accuracy class 0.5, with force holding and pull off stop function, support 100 groups of test Data storage and qualified judgment statistics.
Adopt low-noise stepless speed regulation motor, with a speed range of 0-500mm/min, with force holding function and four test modes, equipped with limit protection device, support pull-off stop and set force value round-trip motion.
Single-arm structure design, with stepless speed range of 1-500mm/min, support pull-off shutdown and peak hold function, can be divided into four gears to achieve +/- 1% Measaccuracy, to meet a variety of material testing needs.
Single arm structure design, support 1-500mm/min stepless speed regulation, force measurement accuracy +/- 1%, can be disbonding, tensile, heat sealing strength test, with fixed elongation force measurement value and Linear dispersion display function.
Adopt double guide Rod structure to ensure Stability, Maximum Measured value 5000N, Travel 220mm, support stepless speed regulation and a variety of test modes, with pull-off stop and force retention functions.
It can cut 140mmx25.4mm samples, sampling thickness ≤ 1mm, Operating temperature 20~ 40 ℃, suitable for auxiliary sampling of Internal Bond Strength test.
Equipped with a 20mm kit and trimmer, the range covers 0-20MPa, and precise positioning is achieved through a transparent sleeve, specially designed for high viscosity coating adhesion testing.
Stepping motor and High Accuracy encoder ensure mechanical stability, displacement accuracy ≤ +/- 0.1mm, speed range 10-800mm/min, support force holding and pull-off stop function, equipped with limit and emergency protection device.
Provides irreversible temperature recording with accuracy of +/- 1 ° C below 100 ° C and +/- 1.5 ° C from 100 ° C to 154 ° C. Self-adhesive design, resistant to oil, water and steam, ensures reliable monitoring.
Irreversible discoloration record historical temperature, accuracy +/- 1 ° C to +/- 4 ° C, oil, water and steam resistance, self-adhesive design for easy installation and storage.
Control mode with closed loop, accuracy of +/- 1%, speed range of 1-500mm/min stepless speed regulation, with pull-off shutdown, peak holding function, universal joint structure to eliminate the influence of the sample.
