In accordance with IULCS. IUP 136 standard, the load is 500g, the scale range is 0.1-10 mm, the Portable design is easy to operate and maintain, and can detect the uniformity of leather Softness and site differences.
The probe is designed with a depth of 8mm and a Probe width of 400mm, which simulates the softness of the hand. It supports a variety of slot-die width configurations. The built-in thermal printer can directly output the test results.
Test speed of 1.2mm/s and press depth of 8mm, equipped with 5-20mm multi-specification narrow width sample table, slot-die parallelism error ≤ 0.05mm, to ensure accurate and reliable softness measurement.
The probe is applied with a load of 530 +/- 10g, and the leather is pressed at a constant speed. The softness index is directly read through the electronic watch, which is suitable for testing a variety of leather types.
Single chip computer digital circuit technology, Measurement range 10~ 1000mN, Indication Error +/- 1%, with 4-bit direct reading display and printing function, Test speed 1.2 +/- 0.24mm/s, suitable for accurate detection of softness.
Measurement range 10~ 1000mN, Test speed 1.2mm/s, 3.5-inch color LCD display test Linear dispersion, built-in thermal printer can directly output test reports, suitable for a variety of slot-die width tests.
Micro Sensor measurement and control system to achieve automatic measurement, Measurement range 10~ 1000mN, accuracy +/- 1%, built-in thermal printer can directly output test reports, support custom slot-die width.
Driven by stepper motor, folding speed 10-200cpm, adjustable test angle 10-180 °, with automatic counting and disconnection automatic stop function to ensure Test accuracy.
Response speed is improved with ARM processor, Measurement range 10-1000mN, accuracy +/- 1%, equipped with four-speed adjustable slot-die 5-20mm, support sudden power failure data saving and real-time pressure Linear dispersion display function.
Stepping motor drive to achieve High Accuracy positioning, test angle 10~ 180 degrees adjustable, folding speed 10~ 200cpm can be set, with automatic counting and disconnection automatic stop function.
High Accuracy Force Sensor to ensure +/- 1% error, stepper motor control for stability testing, built-in calibrating program for third-party calibrating, support for a variety of slot-die widths to adapt to different sample needs.
Using digital DC motor to achieve stepless speed regulation of 1~ 1000mm/min, equipped with arc synchronous toothed belt and precision screw auxiliary drive system, the test accuracy can reach 1 level, and the test can be automatically completed and the maximum force value can be memorized.
Four-speed proofing speed is optional, up to 45m/min, using flat engraving plate for direct printing, supporting 95 × 149mm concave sample range, suitable for fast proofing of flexible substrates.
Support user material calibration function, can store 600 sets of measurement data, equipped with 3.5 inch IPS full view LCD screen, Continuous Operating Time more than 10 hours, automatic identification Probe type without recalibrating.
Measurement range 0-99.9%, resolution 0.1%, Response Time 1 second, portable design supports rapid on-site detection, probe Sensor can penetrate deep into the material internal measurement.
