Using the rotary oscillation mode, Oscillation Frequency up to 3000 rpm, swing amplitude of 5mm, through smooth contact to achieve rapid mixing, speed can be adjusted with pressure, suitable for a variety of laboratory applications.
Rotation speed 2500rpm, can handle 2000ml volume sample, integrated magnetic stirring, vortex mixing and microplate oscillation multi-function.
Integrated mixing oscillation incubate three functions, temperature accuracy +/- 0.5 ℃, speed 200-1800rpm, metal module anti-pollution, support multi-point operation and timing operation.
With magnetic stirring function, the maximum stirring capacity of 2000ml, Speed range 200-2500rpm, vibration range 4.5mm, support point and continuous operation mode switching.
Driven by DC motor, the clamping disc rises and falls rapidly, supports 0-2 hours oscillation time adjustment; with automatic pressure adjustment function to avoid container damage, with 680-710 times/minute Frequency to achieve up and down before and after multi-shake mixing, the main motor Power 750W.
A mixed processing of 50 samples, Speed range 2500rpm, built-in point, linkage, timing three operation modes, optional a variety of foam tuberack to meet the needs of different specifications of testtube.
With point and continuous operation mode, Speed range 200-2500rpm, reinforced engineering plastics and TPU work surface, acid and alkali wear resistance, support magnetic stirring and microplate adaptation.
Adopting rotary oscillation design, Frequency 3000rpm, pendulum amplitude 5mm, suitable for small containers such as testtube and Colorimetric tube, it can efficiently handle the experimental requirements of large chemical reactions and few solutions.
Using positive pressure test principle, Measurement range 0~ 1.6MPa, fully automatic operation, support three test modes, built-in calibrating program, suitable for quantitative measurement of various sealing performance indicators.
The fully automatic electronically controlled hydraulic pump provides smooth and continuous pulling force with +/- 1% accuracy, built-in rechargeable battery supports 200 tests, and IP65 Protection Rating ensures durability.
Featuring a Cotex-M4 ARM processor, it employs pneumatic sample clamping and an integrated weighing mechanism to achieve fully automated measurement. The oscillation frequency is adjustable from 50 to 200 times per minute, with a weighing resolution of up to 0.001g.
DC24V permanent magnet brushless motor direct drive, speed range 200-3000rpm, circumferential diaMeter 4.5mm, with automatic fixture identification and over-temperature protection, noise below 45dB, support jog and continuous operation mode.
Set thermostatic foster and oscillation function in one, Temperature range 4-65 ℃, Oscillation Frequency 40-300rpm, microcomputer PID control to ensure that the temperature fluctuation is only +/- 0.2 ℃, 304 stainless steel liner easy to clean, support continuous operation.
Support 720 ° positive and negative two-way swirl/spin, completely solving the problem of insufficient one-way mixing; the fully automatic intelligent clamping system applies force accurately according to the size of the barrel; the revolution speed is 100-200rpm, and the rotation speed is 200-400rpm, ensuring uniform and efficient mixing.
Pneumatic fixture to achieve automatic clamping, no manual operation; Measurement range covers 10~ 16000mN, support a variety of sheet material Tear strength detection, equipped with 3.2 inch LCD display and thermal printer.
