Using the principle of polarized light interference, equipped with a 560nm full-wave plate, the light diaMeter of the Analyzer is 150mm, which can quickly and continuously analyze the internal stress of transparent materials and support qualitative or semi-Basis Weight measurement.
Using the principle of polarized light interference, equipped with 560nm full-wave plate, determinable or semi-Basis Weight measurement of internal stress, the aperture of the polarizer is 150mm, which supports continuous and rapid analysis of transparent materials.
High Accuracy Observation and Analysis of Birefringent Substances with Stress-free Flat Field Objectives and Large Field Eyepieces, Fretting Grid of 2 μ m, Rotating Stage and Transmission Reflection Illumination.
Optical inspection system with infinite distance, long working distance flat-field objective with non-stress, fretting grid value of 2 μ m, 360 ° adjustable rotating stage, support polarization observation and microphotography.
With transparent reflection lighting switching function, configure center adjustable non-stress objective lens and rotating stage, fretting grid value 2 μ m, table vertical Travel 30mm, support orthogonal and cone light observation.
Range 320~ 320000000mPa · s, support 0.1~ 200rpm stepless speed change, LCD screen can simultaneously display viscosity, shear rate, shear stress and other sets of paraMeters, with a small number of sample adapters only 10-20mL sample volume.
Using 16-bit microcomputer processor and stepper motor high subdivision drive, the whole process of stepless variable speed and stable Rotation speed, Measurement accuracy of +/- 1% F. S, LCD screen can display viscosity, shear rate, shear stress, Rotation speed, temperature and torque and other paraMeters.
Using the principle of polarized light interference, equipped with a quarter-wave plate compensation method, the measurement range of optical path difference is 0-589.44nm, and the measurement accuracy is +/- 4nm, which can realize qualitative observation and quantitative analysis at the same time.
High Accuracy Absolute Angle Encoder to achieve ≤ 2nm Measurement accuracy, dark field without calibrating and polarization field diaMeter 150mm, LED light source energy saving more than 80%, modular design ergonomic.
Stepper motor direct drive to ensure accurate Rotation speed, Measurement accuracy of +/- 1% F. S, repRoducibility +/- 0.5% F. S, LCD with backlight display information, can display the maximum viscosity value and exceed the limit alarm.
Measurement range 0~ 100HC, error +/- 1HC, suitable for the detection of microporous materials with stress above 0.049MPa when the compression rate is 50%.
Temperature range -20~ 150 ℃, Temperature Uniformity ≤ +/- 2.0 ℃, using multi-layer conductive film tempered hollow Glass observation window and upper air supply and lower air return mode to ensure stable and reliable test environment.
Driven by a 16-bit microcomputer processor and a stepper motor, the range is 60 to 60,000,000 mPa · s, and the whole process is continuously variable. The LCD screen displays paraMeters such as viscosity, shear rate, and shear stress.
Temperature range -40~ 150 ℃, Temperature Uniformity ≤ +/- 2.0 ℃, using multi-layer conductive film tempered hollow Glass observation window and upper air supply and lower air return mode to ensure stable and reliable test environment.
The equipment supports transmission, reflection and reflection of three lighting modes, equipped with stress-free flat field objective and large field of view eyepiece, fretting grid value of 2 μ m, table vertical Travel up to 30mm, suitable for a variety of observation modes.
