The extrusion process achieves a coating precision of 0.1 microns, with a wet film thickness of 112.0 μm. The stainless steel material ensures durability, making it particularly suitable for handling high-viscosity samples without clogging issues.
The extrusion molding process is used to ensure continuous wire, the film thickness is precisely controlled by 20μm, the application width is 250mm to meet various needs, and the 304 stainless steel material is durable and easy to clean.
Employing an extrusion production process, the coating thickness is 105 microns, the coating width reaches 300 mm, and the coating accuracy can achieve 0.5 microns, ensuring coating uniformity and high-precision control.
Using extrusion molding process, film thickness 105 microns, application width 250mm, diaMeter 10mm, 304 stainless steel material to ensure durability and accurate Spreader effect.
The extrusion process ensures that the bar is unbroken and easy to clean, the film thickness is 45μm, the total length is 250mm, and the 304 stainless steel material is durable and reliable.
The extrusion molding process is used to ensure the uniformity of the coating, the wet film thickness is 100μm, the application width is 250mm, and the stainless steel material is durable and easy to clean and maintain.
The extrusion process ensures no broken wire, the film thickness is 110 microns, the application width is 300 mm, and the stainless steel material is durable and easy to clean, suitable for precision Spreader applications.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Adopting dip coating with double roll extrusion structure, Spreader thickness 0.3-10 mm adjustable, mechanical speed 1.2m/min can be slowly adjusted, built-in glue circulation system to ensure Spreader uniformity.
The cold extrusion process is used to form a continuous groove to control the wet film thickness, the wet film thickness is 5 μm, the material is 304 stainless steel, and the workmanship is fine and environmentally friendly. Encasement.
Cold extrusion process without winding steel wire, easy to clean and not easy to block, providing 148.6μm accurate wet film thickness and 300mm application width, stainless steel material to ensure durability.
Adopt double roll extrusion method to achieve 0.3-10 mm Spreader Film thickness, accuracy of +/- 0.05mm; Equipped with hot air circulation Oven, Temperature range room temperature to 200 ℃ +/- 3 ℃; Tension controller automatically controls the unwinding process to ensure the uniformity of Spreader.
The minimum wet film thickness can be controlled by 1.5μm, the bottom of the groove is wider and the Coating Weight is larger, and the extrusion process and chrome plating surface are used, which is easy to clean and durable.
304 stainless steel material, through the precision cold extrusion process manufacturing, wet film thickness of 25 microns, 10 mm diaMeter, to provide uniform Spreader effect, optional different lengths to meet the diverse needs.
The extrusion production process ensures uniform coating, with a wet film thickness of 60μm meeting the demands of precise experiments. The 304 stainless steel material is durable and easy to clean, making it suitable for diverse coating performance tests.
