Control system using servo motor, scratch speed 254mm/min, weight free lifting, ensure that the needle parts accurately fall on the workpiece, to achieve automatic scratch and zero operation.
Using equilibrating rod and adjustable weight design, the scratch resistance of the material is evaluated by the scraper head leaving an arc score on the surface of the swirl/spin specimen, which is suitable for a variety of rigid and coating materials.
Steel ball diaMeter 1mm needle, load range 0-2000g, through the minimum load of the film to accurately determine the coating resistance to penetration, traverse speed 30-40mm/s to ensure the test Stability.
Using electric Dial design, the scratch length can reach 60mm, the load range is 0-2000g, and the physical characteristics of the coating are characterized by the anti-penetration ability of the scribing needle.
Made of tungsten, with a total length of 17-18mm and a needle diaMeter of 1mm, it has excellent wear resistance performance and accurate scratch testing ability.
Using digital touch screen control, the test speed is adjustable from 0-40mm/s, the load range is 0-4000g, the minimum increment is 50g, and it is equipped with a variety of weights and special scribing needles to accurately determine the film scratch resistance performance.
Hardness of the lens surface, outstanding scratch resistance, excellent anti-fog effect, in a special working environment to maintain a clear field of vision, protection wavelength 100-400 nm ultraviolet.
The diaMeter of the scraping needle is 0.45mm, the scraping speed is adjustable from 10 to 60 times/minute, and it has an automatic shutdown function to ensure accurate and efficient testing. It is suitable for the durability evaluation of insulating materials.
Hand crank type is easy to operate, load 1000g +/- 1g, scratch speed about 1mm/s, test angle 45 °, standard 6B-6H pencil, in line with a number of international standards, through the pencil Hardness grade to accurately evaluate the scratch performance of the paint film.
Using 1mm diaMeter hemispherical scribe and 30mm/s traverse speed, test coating scratch resistance, load range of 50~ 2000g, automatic identification of scratch points, suitable for a variety of metallic coatings evaluation.
Using 0.5mm tungsten carbide tip, the spherical test point can scratch 2000 90mm long scratches without damage after durability test, the design is comfortable and stable, and it is suitable for regular interval scratch operation in corrosion test.
Double station design can simultaneously carry out two sets of tests, round trip 0-50mm adjustable, test load 80-990g adjustable range, equipped with a variety of weight to meet the wear resistance performance evaluation requirements under different load conditions.
Using stain removal rate evaluation method, scruf speed 37cpm, load 1000g, can accurately adjust the liquid Flow rate, by measuring the reflection coefficient changes to evaluate the stain resistance of coatings.
The device moves the needle at a speed of 1.35mm/s, with a load range of up to 20N, which can evaluate the scratch resistance of coatings, and the voltMeter indicates substrate contact, supporting variable load testing.
Scraper needle diaMeter 0.45mm or 0.125mm optional, scraping speed 10~ 60 times/minute adjustable, automatic detection wear insulation and stop, to ensure Test accuracy and efficiency.
