The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
Adopt 7-inch Touchscreen control, equipped with French Taikang Compressor unit, Temperature Fluctuation ≤ +/- 0.5 ℃, multi-wing air supply cycle to ensure uniform temperature, in line with GB2423 and other standards.
The 7.0-inch large screen is easy to operate, equipped with a French Taikang Compressor unit, Temperature Fluctuation ≤ +/- 0.5 ° C, humidity deviation + 2, -3% R.H, independent temperature and humidity system to improve efficiency.
Temperature range from -50.0 to 1350 ℃, support dual-line display real-time and maximum MIN Minimum, equipped with automatic shutdown and HOLD locking function, resolution of 0.1 ℃/1 ℃, adapt to a variety of environmental conditions.
The mechanical compression spring device is not easy to damage, the accuracy is up to 0.5HW, the film thickness 0.4-6 mm workpiece can be detected, and various Hardness values such as Brinell Rockwell can be obtained through the conversion table.
The 7.0-inch large screen is easy to operate, equipped with a French Taikang fully enclosed Compressor unit, Temperature Uniformity ≤ +/- 2 ° C, humidity deviation + 2, -3% R.H, independent temperature limit alarm system to ensure experimental safety.
Single point temperature measurement design, temperature point 70 ℃, irreversible discoloration characteristics, anti-fouling protective film design, specification 2.5x4 cm, service life indoor 3 years.
The device can precisely control the thickness of the ink layer, the minimum Basis Weight unit is 0.0012CC, and the compact size is φ 20 * 180mm, which is convenient for inks comparison and color concentration detection.
Irreversible discoloration design, temperature accuracy 50 ℃, circular single grid structure, specification 2x2cm, Pressure sensitive adhesive to ensure firm paste, suitable for temperature monitoring in harsh environments.
The imported stainless steel material is resistant to high temperature and corrosion, the intelligent integrated circuit has high temperature control accuracy, the four-hole single-row design improves the experimental efficiency, and the Tank volume is 12L to meet various needs.
Temperature range RT +~ 300 ℃, six-hole single row design, Tank volume 18L, stainless steel material high temperature corrosion resistance, intelligent integrated circuit to ensure temperature stability.
Adopt magnetic Induction principle to measure 0-1250μm thickness, equipped with line Probe measurement groove and narrow area, support single point and two point calibrating, with automatic matrix recognition and undervoltage prompt function.
With dual unit display function, Indication Error is only +/- 1%, push-pull Rod Travel 10mm, handheld design is compact and portable, and can be adapted to a variety of fixtures and tables for accurate measurement.
Portable design, compact size, accuracy of +/- 1%, with peak hold and real-time load switching function, dual unit display without conversion, Maximum Measured value 50kg.
Using high precision Sensor and Glass Draft Shield, weighing accuracy of 0.001g, Stabilization time ≤ 3 seconds. Configure battery to realize AC and DC dual-use, with counting, unit conversion and other practical functions.
