The kit can realize automatic grinding fineness Gauge operation, improve test Repeatability, suitable for standard scraper fineness Meter supporting use, simplify the experimental process.
Double groove structure for rapid detection, accuracy of +/- 2 microns, wear and corrosion resistance, support micron, Hegman, North inclined surface of a variety of scale units, Applicable standards.
Using 320 × 240 color display, support standard, MIN Minimum, differential value and other Measuring methods, Measurement range 1.4~ 200mm, resolution up to +/- 0.01mm, with Automatic calibration and USB data output.
Groove width 37mm, accuracy +/- 2 microns, hardened stainless steel material, wear resistance and corrosion resistance, graded slope design supports micron and Hegman units, suitable for rapid fineness detection.
It can be used with Force Gauge for vertical and horizontal testing, suitable for accurate measurement of thrust or tension, stable structure and easy operation.
Adopt mechanical contact measurement, resolution up to 0.001mm, support automatic and manual modes, automatic lifting of the measurement head to reduce human error, and configure standard measuring blocks to ensure accuracy.
With peak recording and automatic Timing function, Measurement range 20-90HA, resolution 0.1HA, support real-time and average mode, can be connected to the host computer for Data storage and analysis.
This fixture is specially used to fix the Force Gauge display to ensure that the instrument is stable and does not shake during the test. It is suitable for a variety of Force Gauges to improve Test accuracy and ease of operation.
Provide an additional one-year warranty period, which is applicable to Coating thickness Gauge pRoducts. It needs to be purchased simultaneously when purchasing the equipment and is not sold separately.
The device accuracy of +/- 0.5%, the maximum Measured value of 500N, with 10 data storage and automatic calculation of the average function, support for N/kgf/lbf unit automatic conversion, built-in Sensor structure to ensure stable measurement.
Che type hardness Gauge, test range 0~ 100HBa, equivalent to brinell hardness 25~ 150HB, no support, one-handed operation, with MAX Maximum retention function, suitable for various aluminum alloys and frp materials.
Measured value 500N, suitable for sheet, block material push-pull and destructive force test, can be used with Force Gauge test stand.
The built-in Sensor realizes +/- 0.5% Indication Error, is equipped with 10 sets of Data storage and automatic average calculation functions, supports automatic conversion of N/kgf/lbf units, and can be connected to a computer through RS-232 interface to realize Linear dispersion test.
Measurement principle using ultrasonic pulses, accuracy of +/- (1% H + 0.1) mm, Measurement range 0.75-350 mm, with automatic zero point calibrate, two point calibrate and 200 data storage functions, support a variety of materials Speed of sound settings.
Measured value 15000N, suitable for bolt, screw and other standard parts of tensile strength test, designed for Force Gauge test bench, assist tensile testing.
