Overview
The DGC DC-4000 High Precision Ultrasonic Thickness Gauge is an A and B sweep Ultrasonic Thickness Gauge with automatic measurement on a color screen, with manual measurement and automatic measurement. The instrument uses a blue case, equipped with a large LCD color display and a calibrate test block under the operation panel, which can be calibrated at any time to ensure accurate measurement. It provides a variety of Measuring methods, including standard measurement, MIN Minimum measurement, difference value measurement, average measurement and upper and lower limit setting measurement. Users can choose according to their actual needs. High Accuracy, reliable stability and portability.
Features
1. Using 320 × 240 LCD screen, the display data is intuitive and clear
2. Measuring methods: Standard measurement, MIN Minimum measurement, Difference value measurement, Average value measurement, Upper and lower limit setting measurement
3. A scan and B scan with automatic measurement
4. Material thickness measurement through material selection and sound speed input
5. Measurement mode: ordinary measurement and penetrating coating measurement
6. Probe automatic zero calibration and Probe automatic identification
7. gain, gate, etc. can be adjusted automatically or manually
8. A scan, large character or B scan display
9. Standard 5MHz penetrating coating Probe, Miscellaneous Probe optional
10. With USB output interface, you can directly read data
Principle
The DC-4000 Ultrasonic Thickness Gauge uses ultrasonic technology to measure material thickness. Probe emits and receives ultrasonic signals, combined with automatically or manually adjusted gain and gate parameters, for accurate measurement in A-scan and B-scan modes. Users can adapt different materials through material selection and sound speed input for High Accuracy Thickness Detection.
Applications
Industrial testing, material thickness measurement, coating measurement
Steps
1. Press the power switch button to start the instrument
2. Use the menu key to enter the settings interface and confirm the modification items
3. Store data via the up arrow key
4. Automatic calibration instrument zero point using the directional down button
5. Left click in the direction to read the A scan custom parameters
6. Enter the A scan parameter settings with the F1 key, select the setting item, or reset the image under the B scan interface
7. The F2 key switches the measurement interface between A scan, large screen digital display and B scan
8. Use the calibrated test block to calibrate the instrument at any time
Notice
• Probe contact temperature should be below 60 ° C
• Ambient Temperature -20~ 50 ℃, Storage Temperature -20~ 50 ℃
• Powered by 2 * 7 AAA batteries, Operating Time is about 24 hours
• Automatic shutdown time can be selected from 1 minute, 3 minutes or 5 minutes
• Optional Probes include D5008, D5113, D7006, D7004, D2012
