Using a formed pRoduction process, the film Film thickness is as thin as 4.6μm, the accuracy is up to 0.1 micron, and the effective Spreader width is 30cm. It can be used with an automatic Film Applicator and has the advantage of continuous wire.
Impact energy 3N, Impact device mass 75g, suitable for measurement of small or thin specimens and surface hardening layer, the minimum thickness can be measured 1mm and the minimum hardening layer depth 0.2mm.
Equipped with 254nm and 365nm dual-wavelength ultraviolet light sources, it supports thin-layer analysis and paper-layer analysis, can identify fluorescent substances, and is equipped with a 200 * 50mm filter.
Adopting a wire-wound process, with a wet film thickness of 9.1 microns and a coating width of 300mm, it is suitable for ultra-thin coating requirements, offering high precision and ease of operation.
Adopting 500 * 700mm Dimensions, used with bar or Film Applicator, is conducive to the smooth and effective film, and improves the convenience of film operation.
Made of stainless steel wear-resistant material, wet film thickness 41.1 μ m, application width 300mm, suitable for thin coating scraping test of soft materials, durable.
The wet film thickness can be as low as 1.5μm to achieve ultra-thin Spreader; the bottom of the groove is wider, and the Coating Weight is larger; the extrusion process is adopted to avoid the problem of loose wire and broken wire, and it is easy to clean.
Using extrusion process and chrome plating surface, the wet film thickness can be as low as 1.5 μ m, and the groove design is wide to improve the Coating Weight, which solves the problem of traditional steel wire loosening and cleaning difficulties, and realizes stable ultra-thin Spreader.
Wire-wound pRoduction process, wet film thickness 41.1 μ m, application width 300mm, stainless steel wear-resistant material to ensure durability, especially suitable for soft material thin coating Spreader.
Coating speed 5~ 90mm/s adjustable, meyer Rod coating accuracy of +/- 0.001mm, using brushless DC motor drive, digital displacement control, suitable for ultra-thin film and High Accuracy Spreader needs.
The continuous groove structure is made by extrusion process, the thickness of Spreader is 0 μ m, the total length is 400mm and the application width is 300mm. 304 stainless steel is easy to clean.
Adopting the formed preparation 1.5μm wet-film, stainless steel material is durable and easy to clean, suitable for a variety of Coating and chemical fields, application width 60mm.
Wet film thickness 1.5μm, formed pRoduction process and 304 stainless steel material, to ensure that the Spreader uniform durability, suitable for a variety of Coating application scenarios.
Spreader width 100mm, wet film thickness 40μm, wear resistant corrosion resistant alloy steel material, can be manually operated or with automatic Film Applicator to ensure coating conformity and Repeatability.
Using stainless steel material acid and alkali, wet film thickness 50μm accuracy +/- 2μm, suitable for flat and solid substrate coating different pRoducts, surface polishing.
