Suitable for 1 × 10-2 - 1 × 102um/(Pa. S) Air Permeability Range, Measurement accuracy of +/- 1ml (< 100ml), 304 stainless steel fixture and silicone sealing to ensure long-term corrosion resistance and sealing, support multi-gear measurement.
Measurement range 0~ 1000ml/min, pressure difference 0.1~ 2.0kpa, stainless steel end cap and pure copper valve anti-corrosion structure, built-in fixture to avoid rubber pad peeling, suitable for a variety of materials Air Permeability accurate test.
Measurement range 0~ 1000ml/min or 0~ 17µm/(Pa · s), test area 10.0 +/- 0.05cm ², differential pressure accuracy +/- 0.01kPa, clamp ring coaxiality less than 0.05mm, suitable for medium Air Permeability paper testing.
Measurement range 0~ 1000ml/min, test area 10cm ², test area pressure difference 1kPa, suitable for a variety of industrial paper ventilation performance detection.
Measurement range 0~ 1000ml/min, test area pressure accuracy of +/- 0.01kPa, equipped with 10cm ² standard test area and 35.68mm clamping ring, support different duration test.
Vacuum Level 100 or 200 mm water column constant test, Measurement range 0-1000ml/min, test area 10cm ², support a variety of paper ventilation performance evaluation.
The adjustable air volume fan system is used to maintain the average air speed in the working area ≥ 0.3m/s, and the closure efficiency of HEPA Filter for 0.3μm particles is 99.99%. The pre-Filter is equipped to extend the service life, and the working area is equipped with lighting and ultraviolet sterilizing functions.
The test area is 30cm ², suitable for self-supporting and non-self-supporting coating testing, and the permeability of water vapor or Miscellaneous gaseous substances to the film can be determined by the wet Cup method or the dry Cup method.
Vacuum principle measurement paper breathability performance, Measurement range 0-1000ml/min, test area of 10cm ², suitable for a variety of industrial paper mass detection.
The test area is 50cm ², which supports two test modes of wet Cup method and dry Cup method, which can measure the permeability of water vapor and Miscellaneous gaseous substances to the film, and is suitable for coating performance evaluation under different environment conditions.
Double pulse Back flushing automatic powder cleaning, Laminating filter accuracy of 0.3 microns, powder gas separation efficiency, stainless steel material is durable, color change operation is simple, improve dust recovery efficiency.
Test area of 10cm ², in line with a number of international standards, support self-supporting and non-self-supporting coating testing, can be measured by wet Cup method and dry Cup method of water vapor permeability, suitable for different environmental conditions.
As an Optional accessory of air Compressor, it can effectively separate oil and water, improve compressed air mass, and is suitable for industrial environments that require gas purity.
High Accuracy air-floating hydrostatic bearing structure, spindle accuracy +/- 0.025μm, system accuracy 0.06μm, with automatic identification of interruptions and removal of notches, support part of the arc measurement and a variety of filter band selection.
4Mm diaMeter outflow hole design, stainless steel material durable anti-corrosion, can be replaced freely with filter holder, expand the scope of application of viscosity Cup test.
