Laser Sensor is used to directly measure the natural vibration Frequency of the belt, combined with the input belt mass and free length to calculate the tension, Measurement range 10Hz~ 500Hz, split Sensor size can penetrate into 66mm narrow space, support Metric Imperial Unit switch.
Adopting stainless steel shell, the belt is equipped with a sink to collect grinding materials, the belt adjustment device can adjust the tightness, Rotation speed 1400rpm, Power 0.55kW, easy operation and maintenance.
Laser Sensor is used to directly measure the natural vibration Frequency of the belt. Measurement range is 10Hz~ 800Hz. The size of the split Probe is only 124 * 21 * 12mm. It can penetrate into a small space of 66mm and supports metric and imperial Unit switching.
Laser Sensor is used to directly measure the natural vibration frequency of the belt. Measurement range is 10-800Hz. The split probe size is 124 * 21 * 12mm and can penetrate into a small space of 66mm. It supports metric and imperial unit switching.
Laser Sensor is used to directly measure the natural vibration frequency of the belt. The size of the split probe is only 124 * 21 * 12mm, which can penetrate into the depth of 66mm. Measurement range is 10-500Hz, and it supports metric and imperial unit switching.
Using a roll-to-roll continuous solution cell process, the substrate is crystallized or attached under specific conditions. Equipped with a 130 ° C hot air Oven drying system, the effective application width is 180mm, and the mechanical speed range is 0.1-300 mm/min. The solution cell has a lifting function and a separate heating design to ensure process Stability and operation safety.
Measurement frequency up to 680Hz with accuracy in the range of +/- 1Hz to +/- 1%, suitable for transmission system vibration detection.
Real-time display of tension value and accompanied by sound and light indication, no need to continuously observe the screen; automatic storage of upper and lower limits and calibrated data, power failure is not lost; Measurement range 0-750N, accuracy +/- 5%, support a variety of unit conversion.
Using quartz time base technology to ensure accurate measurement, Maximum Measured value 750N, Real-time display of tension data and support for voice prompts, automatic storage of upper and lower limit setting values, providing USB, RS-232 and Bluetooth Data output methods.
Pure oil-free design ensures clean gas, exhaust volume of 1500L/min, automatic start and stop to reduce energy consumption, pressure dew point 2-10 ℃, suitable for a variety of industry needs.
Adopt pure oil-free design to ensure clean gas, dew point range -40~ -60 ℃, exhaust volume 600L/min, automatic start and stop to reduce energy consumption, no need for special personnel on duty and easy maintenance.
With 3000 times/min and 6000 times/min two vibration frequencies, the amplitude can be continuously adjusted between 0mm and 3mm, supporting three modes of subtle vibration, intermittent vibration and continuous vibration, suitable for ≤ 325 mesh material analysis.
Equipped with 6.3:1 continuous zoom ratio and 115mm standard working distance, it supports large field of view flat image surface, adjustable binocular visibility, and comfortable operation of the zoom handwheel bilateral setting, suitable for long-term use.
Automatic calibration and continuous test function, Measurement Angles 60 degrees, Indication Error less than 1.2GU, LED long life Illuminant, energy saving and power saving, two AA batteries can measure nearly 10,000 data.
The equipment is designed with double rollers, with a test load of 5kg, a drop height of 500 + 1000mm, and a rotation speed of 5-20 times/minute to meet the needs of continuous rotary drop testing.
