Illuminance Meter brightness Meter

An illuminance meter measures the luminous flux received per unit area and is used for environmental light assessment; a luminance meter measures the luminous intensity emitted per unit area and is used for display screens and material surface testing. Both convert light signals into electrical signals through photoelectric sensors and are applied in lighting design and product quality control.
Selection
When selecting, consider that the measurement range covers the usage scenarios, accuracy meets testing requirements, probe size fits the object being measured, calibration certificates ensure measurement accuracy, and portability and battery life suit on-site usage conditions.

Terms

Instruments

Adopt high-power high-illumination LED Illuminant, Color temperature adjustment range 2300K-8500K, illuminance adjustment range 0-3000LX, no stroboscopic design life of more than 10,000 hours, uniform illumination surface can flexibly adjust the position angle.

$ 5366.00

The uniformity of the transmission surface exceeds 90%, the standard four-speed Color temperature is adjustable, the illuminance adjustment range is 0-120000Lux, and the thickness dimming knob is equipped to achieve precise control. Illuminant has no stroboscopic and the lifespan is more than 10,000 hours.

$ 5237.00

Provide adjustable illuminance and Color temperature visible light, Color temperature range 2300K-8000K, illuminance up to 3000LX, infrared wavelength 850nm optional, radiation intensity greater than 400uW/CM ², stable light color without stroboscopic, life over 10,000 hours.

$ 5850.00

Using high-power LED Illuminant, Color temperature adjustment range 2300K-8500K, illuminance adjustment range 0-3000LX, life of more than 10,000 hours, uniform irradiation without stroboscopic.

$ 7464.00

The equipment range 0~ 30% vol, resolution 0.1%, support three alarm and temperature measurement, high-brightness backlight for low-light environment use, can set the lock machine password to enhance security.

$ 155.00

Transmission surface uniformity of more than 93%, Color temperature adjustment range 2300K-8000K, Illuminance adjustable 0-160,000 Lux, Support Frequency adjustment 1-100KHz, life of more than 10,000 hours, can be connected through RS485 or WIFI computer control.

$ 5366.00

Color temperature adjustment range 2300K-8000K, illumination adjustment 0-1.3 million Lux, Frequency adjustment 1-100KHz, support RS485 to USB and WIFI connection, life up to 10,000 hours or more, to meet a variety of test conditions.

$ 4269.00

Using high-power LED Illuminant, Color temperature adjustment range 2300K-8500K, illumination up to 3000LX, life more than 10,000 hours, uniform irradiation surface and no stroboscopic, flexible adjustment of light box position and angle according to test requirements.

$ 12305.00

Scanning range 0-6000mm, 100 independent flaw detection channels, support Automatic calibration and defect echo positioning, with high-brightness color display and three-proof design, adapt to various complex working environments.

$ 1816.00

800L large capacity, Temperature range 4~ 50 ℃, Illumrination degree 0~ 30000LX six adjustable, can simulate day and night temperature Humidity changes, support 30 sets of program settings and independent temperature limit alarm.

$ 6194.00

Built-in mobile slide table can move the camera front and rear, high display finger no stroboscopic LED Illuminant Color temperature is stable, the illuminance is adjustable, the back plate of the box can post 712mm * 400mm test card to provide a uniform lighting environment.

$ 4592.00

Measurement range 0.1-100 lx, accuracy +/- 3%, measurement of Flicker Frequency, Correlated Color temperature, Color rendering index, Blu-ray hazard ratio and other paraMeters, and display Spectral Curve.

$ 199.00

Color temperature adjustment range 2300K-8000K, illumination adjustment range 0-4000Lux, built-in mobile slide can move the camera front and rear, light source light board can swirl/spin to adjust the angle, provide a uniform lighting environment.

$ 5366.00

Using E Illuminant irradiation and 5 times reflection projection technology, Illuminant illuminance is not less than 1200X, measurement distinctness of image level from 0.1 to 2.0, suitable for detecting coating surface clarity.

$ 369.00

Adopt D-type Impact device and optional Miscellaneous six Impact devices, automatic identification and replacement without calibrating; can store 600 sets of measurement data, support seven Hardness standards automatic conversion, Measurement range covers 30~ 110HS to 80~ 976HV.

$ 340.00

Articles