Rotation speed 80rpm, Working Travel 80mm, in line with international standards, to ensure accurate and reliable film adhesion assessment.
The adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel ≥ 80mm. The integrity of the paint film was evaluated by seven grades, and the operation was simple and conformed to the GB/T1720 standard.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
Rotation speed 3000rpm, maximum linear speed 33m/s, high dispersion efficiency, strong material shear force, the formation of uniform suspension effect, safe and convenient operation, electric lifting fast fixed sealing barrel.
Electric lifting design is light and convenient, the highest Rotation speed 3000rpm, linear speed of 33m/s, double-end sealing structure to ensure vacuum sealing defoaming, suitable for viscosity ≤ 25000cps materials.
Adopt electric lift design, lift Travel up to 500mm; Equipped with 2200W three-phase asynchronous motor, Speed range 0-2800rpm; Support four rotation stator head replacement, adapt to different viscosity material handling needs.
Adopt electric push Rod to drive Spreader movement, adjustable speed range of 2-200mm/s, temperature accuracy +/- 3 ℃, support Vacuum chuck and electric heating function, improve Spreader uniformity and operation convenience.
Rotation speed up to 3000rpm, maximum linear speed 33m/s, Processing capacity 10-40L, using electric lifting and double-end sealing structure, high dispersion efficiency, vacuum sealing defoaming effect is good, safe and convenient operation.
Impact height of 120 cm, hammer mass 1000g, no secondary rebound phenomenon after impact, punch diaMeter 16mm, can accurately determine the impact strength of the paint film.
Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
Rotation speed up to 3000rpm, line speed up to 33m/s, Processing capacity 10-40L, using electric lifting and double-end sealing structure, uniform dispersion and vacuum sealing defoaming effect is good.
Vacuum sealing defoaming effect, Rotation speed up to 3000rpm, linear speed up to 33m/s, electric lifting operation is convenient, high dispersion efficiency, suitable for viscosity ≤ 25000cps materials.
Special rotor-stator structure is adopted to generate high-frequency mechanical effects, and the material is subjected to hundreds of thousands of shearing effects. Electric lift design allows lift Travel up to 600mm, making it easy to adjust the operating height under different working conditions.
