Measurement range 0.5-3000 μm, maximum resolution 0.1μm, support more than 30 image analysis functions, Particle size distribution and morphology analysis.
With six-channel particle size sampling coverage 0.3-10 μm range, Sampling flow rate 2.83L/min; built-in high-speed thermal printer and long-life laser Illuminant, support AC-DC dual-use and can work continuously for more than 6 hours.
Using light scattering principle to detect 0.3-10 μ m six-channel particle size, Sampling flow rate 2.83L/min, built-in thermal printer and long-life laser Illuminant, support AC-DC dual-use and continuous sampling for more than 6 hours.
With six-channel particle size detection and 2.83L/min Sampling flow rate, using laser Illuminant life of over 30,000 hours, support UCL calculation and Built-in Printer, AC-DC dual-use can work continuously for more than 6 hours.
Test range 0.5~ 3000μm, Maximum magnification 4000 times, can analyze the number of particles, area, circumference, diaMeter, aspect ratio and other distribution data, support a variety of formats of test report output.
100L/min Sampling flow rate and six particle size channel detection, equipped with long life laser Illuminant and imported air pump, support Touchscreen operation and USB data export function.
Using 50L/min Sampling flow rate and six particle size channel synchronous detection, equipped with semiconductor laser Illuminant and Touchscreen control, built-in thermal printer supports real-time data output, Continuous Operating Time up to 5 hours.
Using laser scattering technology, a single measurement can simultaneously display up to five particle size particulate matter (PM) concentrations, Sensitivity of 0.001 mg/m ³, no need to replace the cutting head, support continuous monitoring and Data storage functions.
The image method is used to analyze the particle morphology and particle size, the test range is 1~ 3500 μ m, the system magnification is 4000 times, the automatic segmentation success rate exceeds 93%, and paraMeters such as length-diaMeter ratio and sphericity can be counted.
Using laser scattering technology, one measurement simultaneously displays five particle size data, detection range 0.01-100 mg/m ³, Sensitivity up to 0.01mg/m ³, no need to replace the cutting head, support continuous monitoring and Data storage functions.
Featuring a stainless steel frame suitable for dry, wet, and manual sieving, with a pore size of 250μm, laser engraving provides clear labeling to ensure full traceability.
With two movements of reciprocating and top-beating vibration, the screening efficiency is high and does not block the screen surface. It can be adapted to a set of screening screens of Φ 200, Φ 75, and Φ 100. The number of swirl/spins is 290 +/- 6 times/minute, and the number of beats is 156 +/- 3 times.
With six particle size channel detection capability, sampling capacity of 2.83L/min, built-in lithium battery supports 6 hours of continuous operation, using semiconductor laser Illuminant and color Touchscreen design.
Using light scattering principle to detect 0.3-10 μ m particle size, Sampling flow rate 28.3L/min, built-in lithium battery supports 6 hours of work, can directly save data to U disk, equipped with thermal printer for on-site output.
The stainless steel frame is suitable for wet and dry screening, laser engraving ensures clear traceability, and the aperture of 100μm meets the needs of fine grading.
